AD7708BRU-REEL vs AD7780BRZ-REEL Comparaison

Comparaison détaillée côte à côte de AD7708BRU-REEL par Analog Devices et AD7780BRZ-REEL par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Comparaison des spécifications

Paramètre AD7708BRU-REEL AD7780BRZ-REEL
Marque Analog Devices Analog Devices
Catégorie ADC/DAC ADC/DAC
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $6,19 $5,18
Résolution 16 bits 24 bits
Number of Input Channels 4 differential / 8 pseudo-differential / 10 pseudo-differential —
ADC Architecture Sigma-Delta —
Supply Voltage Range 2.7 V to 5.25 V (AVDD, DVDD) —
Data Interface DSP, MICROWIRE, QSPI, Serial, SPI —
Boîtier 28-TSSOP (0.173 in / 4.40 mm width) 14-SOIC (R-14) narrow body
Type de montage Surface Mount Surface Mount
Plage de température de fonctionnement -40 C to +85 C -40 °C to +85 °C (industrial)
Factory Calibration Yes, per channel —
Programmable Gain Amplifier Yes (gains 1 to 128) —
Reference Input External (2.5V typical, e.g. ADR291/AD780) External or AVDD-tied
Input Configuration 4 fully-differential or 8/10 pseudo-differential —
Pin-Compatible Upgrade AD7718 (24-bit) in same TSSOP-28 / SOIC-28 —
Statut RoHS Compliant (AD7708BRUZ variant); non-RoHS on BRU suffix Compliant
Packaging Tape & Reel (REEL) —
Converter Type — Sigma-Delta (Σ-Δ)
Number of Channels — 1 differential input
Analog Supply Voltage (AVDD) — 2.7 V to 5.25 V
Digital Supply Voltage (DVDD) — 2.7 V to 5.25 V
Courant d'alimentation — 330 µA typical
On-board PGA Gain Range — 1 to 128 (pin-programmable, 1/2/4/8/16/32/64/128)
Update Rate — 10 Hz (low-noise) or 16.7 Hz (low-power)
On-chip Oscillator — Yes (no external crystal required)
Common-Mode Rejection (50 Hz / 60 Hz) — [DATA_NEEDED: CMRR at 50/60 Hz from datasheet]
Output Data Rate Resolution — 20 bits noise-free (typical, G=128)
Filter Type — Sinc³ digital filter, pin-programmable
Interface — 2-wire serial (read-only via DRDY pin)
Power-Down Current — [DATA_NEEDED: standby current]
Niveau MSL — 1 (unlimited floor life per JEDEC J-STD-020)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis