AD7708BRU-REEL vs AD7780BRZ-REEL Comparação

Comparação detalhada lado a lado de AD7708BRU-REEL por Analog Devices e AD7780BRZ-REEL por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.

Comparação de especificações

Parâmetro AD7708BRU-REEL AD7780BRZ-REEL
Marca Analog Devices Analog Devices
Categoria ADC/DAC ADC/DAC
Status do ciclo de vida Ativo Ativo
Status do estoque In Stock In Stock
Preço unitário (USD) $6,19 $5,18
Resolução 16 bits 24 bits
Number of Input Channels 4 differential / 8 pseudo-differential / 10 pseudo-differential —
ADC Architecture Sigma-Delta —
Supply Voltage Range 2.7 V to 5.25 V (AVDD, DVDD) —
Data Interface DSP, MICROWIRE, QSPI, Serial, SPI —
Encapsulamento 28-TSSOP (0.173 in / 4.40 mm width) 14-SOIC (R-14) narrow body
Tipo de montagem Surface Mount Surface Mount
Faixa de temperatura de operação -40 C to +85 C -40 °C to +85 °C (industrial)
Factory Calibration Yes, per channel —
Programmable Gain Amplifier Yes (gains 1 to 128) —
Reference Input External (2.5V typical, e.g. ADR291/AD780) External or AVDD-tied
Input Configuration 4 fully-differential or 8/10 pseudo-differential —
Pin-Compatible Upgrade AD7718 (24-bit) in same TSSOP-28 / SOIC-28 —
Status RoHS Compliant (AD7708BRUZ variant); non-RoHS on BRU suffix Compliant
Packaging Tape & Reel (REEL) —
Converter Type — Sigma-Delta (Σ-Δ)
Number of Channels — 1 differential input
Analog Supply Voltage (AVDD) — 2.7 V to 5.25 V
Digital Supply Voltage (DVDD) — 2.7 V to 5.25 V
Corrente de alimentação — 330 µA typical
On-board PGA Gain Range — 1 to 128 (pin-programmable, 1/2/4/8/16/32/64/128)
Update Rate — 10 Hz (low-noise) or 16.7 Hz (low-power)
On-chip Oscillator — Yes (no external crystal required)
Common-Mode Rejection (50 Hz / 60 Hz) — [DATA_NEEDED: CMRR at 50/60 Hz from datasheet]
Output Data Rate Resolution — 20 bits noise-free (typical, G=128)
Filter Type — Sinc³ digital filter, pin-programmable
Interface — 2-wire serial (read-only via DRDY pin)
Power-Down Current — [DATA_NEEDED: standby current]
Nível MSL — 1 (unlimited floor life per JEDEC J-STD-020)

Fichas técnicas e recursos

Ver todos os produtos Criar BOM Solicitar cotação