ADF4218BRU vs ADF4212LBRUZ-RL Comparaison

Comparaison détaillée côte à côte de ADF4218BRU par Analog Devices et ADF4212LBRUZ-RL par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
ADF4212LBRUZ-RL ADF4212LBRUZ-RL - 2.4GHz Dual PLL Synthesizer | Analog Devices

ADF4212LBRUZ-RL - 2.4GHz Dual PLL Synthesizer | Analog Devices

ADF4212LBRUZ-RL ✓ Actif

Comparaison des spécifications

Paramètre ADF4218BRU ADF4212LBRUZ-RL
Marque Analog Devices Analog Devices
Catégorie Clock & Timing Clock & Timing
Statut du cycle de vie Actif Actif
Product Type Dual integer-N RF PLL frequency synthesizer —
Number of Synthesizers 2 —
Maximum RF Input Frequency 2.5 GHz 2.4 GHz
Frequency Configuration Options 550 MHz/1.2 GHz, 550 MHz/2.0 GHz, or 550 MHz/2.5 GHz —
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V
Maximum Supply Voltage 5.5 V —
Plage de température de fonctionnement -40°C to +85°C [DATA_NEEDED: operating temperature range]
Serial Interface 3-wire —
RF Prescaler Options 16/17 or 64/65 —
Charge Pump Precision charge pump with selectable current —
Phase Detector Low-noise digital phase-frequency detector —
Reference Divider Programmable —
Integer-N Divider Programmable —
Power-Down Mode Supported Supported
Boîtier TSSOP-20 20-pin TSSOP, 0.173 in (4.40 mm) width
Terminal Count 20 terminals —
Terminal Pitch 0.65 mm —
Statut RoHS [DATA_NEEDED: RoHS compliance status] Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Device Type — Dual RF/IF PLL frequency synthesizer
Maximum IF Input Frequency — 1.0 GHz
Architecture — Dual phase-locked loop
RF/IF Prescaler Ratios — 8/9, 16/17, 32/33, and 64/65
Charge Pump Current — Programmable
Reference Counter — 15-bit programmable R counter
Serial Control Interface — 3-wire
Lock Detection — Analog and digital
Fastlock Mode — Supported
Charge Pump Supply — Separate VP supply
Total IDD — 7.5 mA
Type de montage — Surface mount
Temperature Grade — Industrial
Reference Input Frequency — [DATA_NEEDED: reference input frequency]
Output Tuning Voltage Range — [DATA_NEEDED: output tuning voltage range]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis