ADF4218BRU vs ADF4212LBRUZ-RL 비교
다음의 상세 나란히 비교: ADF4218BRU 제조: Analog Devices 및 ADF4212LBRUZ-RL 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ADF4218BRU | ADF4212LBRUZ-RL |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Clock & Timing | Clock & Timing |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Dual integer-N RF PLL frequency synthesizer | — |
| Number of Synthesizers | 2 | — |
| Maximum RF Input Frequency | 2.5 GHz | 2.4 GHz |
| Frequency Configuration Options | 550 MHz/1.2 GHz, 550 MHz/2.0 GHz, or 550 MHz/2.5 GHz | — |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Maximum Supply Voltage | 5.5 V | — |
| 동작 온도 범위 | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Serial Interface | 3-wire | — |
| RF Prescaler Options | 16/17 or 64/65 | — |
| Charge Pump | Precision charge pump with selectable current | — |
| Phase Detector | Low-noise digital phase-frequency detector | — |
| Reference Divider | Programmable | — |
| Integer-N Divider | Programmable | — |
| Power-Down Mode | Supported | Supported |
| 패키지 | TSSOP-20 | 20-pin TSSOP, 0.173 in (4.40 mm) width |
| Terminal Count | 20 terminals | — |
| Terminal Pitch | 0.65 mm | — |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | Dual RF/IF PLL frequency synthesizer |
| Maximum IF Input Frequency | — | 1.0 GHz |
| Architecture | — | Dual phase-locked loop |
| RF/IF Prescaler Ratios | — | 8/9, 16/17, 32/33, and 64/65 |
| Charge Pump Current | — | Programmable |
| Reference Counter | — | 15-bit programmable R counter |
| Serial Control Interface | — | 3-wire |
| Lock Detection | — | Analog and digital |
| Fastlock Mode | — | Supported |
| Charge Pump Supply | — | Separate VP supply |
| Total IDD | — | 7.5 mA |
| 실장 유형 | — | Surface mount |
| Temperature Grade | — | Industrial |
| Reference Input Frequency | — | [DATA_NEEDED: reference input frequency] |
| Output Tuning Voltage Range | — | [DATA_NEEDED: output tuning voltage range] |