ADM485JNZ vs MAX485EESA+T Comparaison

Comparaison détaillée côte à côte de ADM485JNZ par Analog Devices et MAX485EESA+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX485EESA+T MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T ✓ Actif

Comparaison des spécifications

Paramètre ADM485JNZ MAX485EESA+T
Marque Analog Devices Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Transceiver Configuration 1 transmitter and 1 receiver —
Supported Protocols EIA RS-485 and EIA RS-422 —
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V
Maximum Data Rate 5 Mbps 2.5 Mbps
Bus Common-Mode Range +12 V —
Logic Interface Differential driver and differential receiver —
Driver Enable Control Logic-controlled input —
Receiver Enable Control Logic-controlled input —
Circuit Technology Low-power BiCMOS —
Thermal Protection Thermal shutdown protection —
Output Protection Short-circuit protection —
Package Type 8-pin PDIP —
Package Pitch 7.62 mm —
Package Form Factor 8-DIP, 0.300 inch —
Packaging Tube —
Type de montage Through-hole Surface mount
Statut RoHS ROHS3 compliant [DATA_NEEDED: RoHS status]
Minimum Operating Temperature [DATA_NEEDED: minimum operating temperature] —
Maximum Operating Temperature [DATA_NEEDED: maximum operating temperature] —
Maximum Supply Current [DATA_NEEDED: maximum supply current] —
Propagation Delay [DATA_NEEDED: driver and receiver propagation delay] —
Differential Input Sensitivity [DATA_NEEDED: differential input sensitivity] —
Product Type — Half-duplex RS-485/RS-422 transceiver
Nominal Supply Voltage — 5 V
Driver Output Type — Slew-rate-limited differential driver
Receiver Output Type — Differential logic-level receiver
ESD Protection — ±15 kV
Communication Mode — Half-duplex
Supported Standards — RS-485 and RS-422
Boîtier — 8-pin NSOIC/SOIC
Plage de température de fonctionnement — -40 °C to +85 °C
Driver and Receiver Count — 1 driver and 1 receiver
Power Classification — Low-power transceiver
REACH Status — [DATA_NEEDED: REACH status]
MSL — [DATA_NEEDED: moisture sensitivity level]
Maximum Bus Length — [DATA_NEEDED: maximum bus length]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis