ADM485JNZ vs MAX485EESA+T 比較

詳細な並列比較: ADM485JNZ メーカー: Analog Devices および MAX485EESA+T メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Analog Devices
ADM485JNZ ADM485JNZ - 5V 5Mbps RS-485/422 Transceiver | Analog Devices

ADM485JNZ - 5V 5Mbps RS-485/422 Transceiver | Analog Devices

ADM485JNZ ✓ 生産中
Analog Devices
MAX485EESA+T MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T ✓ 生産中

仕様比較

パラメータ ADM485JNZ MAX485EESA+T
ブランド Analog Devices Analog Devices
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Transceiver Configuration 1 transmitter and 1 receiver —
Supported Protocols EIA RS-485 and EIA RS-422 —
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V
Maximum Data Rate 5 Mbps 2.5 Mbps
Bus Common-Mode Range +12 V —
Logic Interface Differential driver and differential receiver —
Driver Enable Control Logic-controlled input —
Receiver Enable Control Logic-controlled input —
Circuit Technology Low-power BiCMOS —
Thermal Protection Thermal shutdown protection —
Output Protection Short-circuit protection —
Package Type 8-pin PDIP —
Package Pitch 7.62 mm —
Package Form Factor 8-DIP, 0.300 inch —
Packaging Tube —
実装タイプ Through-hole Surface mount
RoHS ステータス ROHS3 compliant [DATA_NEEDED: RoHS status]
Minimum Operating Temperature [DATA_NEEDED: minimum operating temperature] —
Maximum Operating Temperature [DATA_NEEDED: maximum operating temperature] —
Maximum Supply Current [DATA_NEEDED: maximum supply current] —
Propagation Delay [DATA_NEEDED: driver and receiver propagation delay] —
Differential Input Sensitivity [DATA_NEEDED: differential input sensitivity] —
Product Type — Half-duplex RS-485/RS-422 transceiver
Nominal Supply Voltage — 5 V
Driver Output Type — Slew-rate-limited differential driver
Receiver Output Type — Differential logic-level receiver
ESD Protection — ±15 kV
Communication Mode — Half-duplex
Supported Standards — RS-485 and RS-422
パッケージ — 8-pin NSOIC/SOIC
動作温度範囲 — -40 °C to +85 °C
Driver and Receiver Count — 1 driver and 1 receiver
Power Classification — Low-power transceiver
REACH Status — [DATA_NEEDED: REACH status]
MSL — [DATA_NEEDED: moisture sensitivity level]
Maximum Bus Length — [DATA_NEEDED: maximum bus length]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼