ADM488ANZ vs MAX3488EPA+ Comparaison
Comparaison détaillée côte à côte de ADM488ANZ par Analog Devices et MAX3488EPA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ADM488ANZ | MAX3488EPA+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Full-duplex differential transceiver | RS-485/RS-422 transceiver |
| Supported Protocols | EIA RS-422 and EIA RS-485 | — |
| Number of Drivers | 1 driver | — |
| Number of Receivers | 1 receiver | — |
| Maximum Data Rate | 250 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | 3.0 V to 3.6 V |
| Operating Mode | Full duplex | — |
| Driver Output Characteristics | Slew-rate limited | — |
| Power Class | Low power | — |
| Boîtier | 8-PDIP (0.300 inch, 7.62 mm pitch) | 8-pin PDIP |
| Type de montage | Through-hole PDIP | Through-hole |
| Packaging | Tube | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Maximum Bus Load | [DATA_NEEDED: maximum bus load] | — |
| ESD Protection Level | [DATA_NEEDED: ESD protection rating] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Tension d'alimentation | — | 3.3 V |
| Débit de données | — | 10 Mbps |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Standards | — | RS-422 and RS-485 |
| Slew-Rate Limiting | — | Yes |
| Température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Differential Input Voltage | — | [DATA_NEEDED: differential input voltage] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Supply Current | — | [DATA_NEEDED: receiver supply current] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Termination | — | External termination required according to bus design |