ADM488ANZ vs MAX3488EPA+ 비교

다음의 상세 나란히 비교: ADM488ANZ 제조: Analog Devices 및 MAX3488EPA+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Analog Devices
ADM488ANZ ADM488ANZ - 250 kbps RS-485 Transceiver | Analog Devices

ADM488ANZ - 250 kbps RS-485 Transceiver | Analog Devices

ADM488ANZ ✓ 활성
Analog Devices
MAX3488EPA+ MAX3488EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3488EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3488EPA+ ✓ 활성

사양 비교

파라미터 ADM488ANZ MAX3488EPA+
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type Full-duplex differential transceiver RS-485/RS-422 transceiver
Supported Protocols EIA RS-422 and EIA RS-485 —
Number of Drivers 1 driver —
Number of Receivers 1 receiver —
Maximum Data Rate 250 kbps —
Supply Voltage Range 4.5 V to 5.5 V 3.0 V to 3.6 V
Operating Mode Full duplex —
Driver Output Characteristics Slew-rate limited —
Power Class Low power —
패키지 8-PDIP (0.300 inch, 7.62 mm pitch) 8-pin PDIP
실장 유형 Through-hole PDIP Through-hole
Packaging Tube —
동작 온도 범위 [DATA_NEEDED: operating temperature range] —
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] —
Maximum Bus Load [DATA_NEEDED: maximum bus load] —
ESD Protection Level [DATA_NEEDED: ESD protection rating] —
공급 전류 [DATA_NEEDED: supply current] —
RoHS 상태 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
공급 전압 — 3.3 V
데이터 속도 — 10 Mbps
Driver Count — 1 driver
Receiver Count — 1 receiver
Standards — RS-422 and RS-485
Slew-Rate Limiting — Yes
동작 온도 — [DATA_NEEDED: operating temperature range]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection]
Differential Input Voltage — [DATA_NEEDED: differential input voltage]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Supply Current — [DATA_NEEDED: receiver supply current]
ESD Protection — [DATA_NEEDED: ESD protection rating]
Termination — External termination required according to bus design

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청