ATK-LORA-01 vs ATK-LORA-02 Comparaison
Comparaison détaillée côte à côte de ATK-LORA-01 par ALIENTEK et ATK-LORA-02 par ALIENTEK. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ATK-LORA-01 | ATK-LORA-02 |
|---|---|---|
| Marque | ALIENTEK | ALIENTEK |
| Catégorie | RF Modules | RF Modules |
| Statut du cycle de vie | Actif | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,50 | $5,40 |
| Module Type | LoRa wireless serial (UART) module | LoRa wireless serial port module |
| RF Chip | Semtech SX1278 | — |
| Operating Frequency | 410 MHz to 441 MHz | [DATA_NEEDED: sub-GHz ISM band] |
| Channel Step | 1 MHz (32 channels) | — |
| Modulation | LoRa (CSS) / FSK / OOK | LoRa CSS chirp spread spectrum |
| Air Data Rate (max) | 19200 bps | — |
| Communication Range | 3000 m (line-of-sight, open field) | — |
| Transmit Power | Up to +20 dBm (100 mW) | — |
| Receive Sensitivity | -137 dBm at SF6/SF7 BW=125 kHz [DATA_NEEDED: confirm exact SF/BW condition from datasheet] | — |
| Interface | UART (TTL) - TXD, RXD | — |
| Default UART Baud | 9600 bps | — |
| Tension d'alimentation | 3.3 V to 5 V DC | — |
| Module Size | 36 mm x 20 mm | — |
| Antenna Connector | SMA + optional IPEX pad | — |
| Température de fonctionnement | -40 to +85 C [DATA_NEEDED: confirm from official datasheet] | -40C to +85C |
| Encryption | AES-128 hardware | — |
| Spreading Factor | SF6 to SF12 (configurable via AT commands) | — |
| Type de montage | Through-hole pin header (DIP-style breakout) | Surface Mount (SMD) |
| Manufacturer | — | ALIENTEK (ZhengDianYuanZi) |
| RF Chipset | — | [DATA_NEEDED: chipset family] |
| Tx Power | — | up to +20 dBm (100 mW) |
| Rx Sensitivity | — | -120 dBm or better (low data rate) |
| Air Data Rate | — | 0.3 kbps to 62.5 kbps |
| Spreading Factors | — | 6 levels (SF6-SF12) |
| Bandwidth | — | 7.8 kHz to 500 kHz |
| Host Interface | — | UART (TXD/RXD), MD0, AUX, 3.3V TTL |
| Operating Voltage | — | 3.3 V DC typical |
| Package / Dimensions | — | SMD-15, 17 x 24 mm |
| Range (Line-of-Sight) | — | [DATA_NEEDED: spec range value] |
| Configuration | — | AT command set over UART |
| Max Packet Size | — | 256 bytes |
| Statut RoHS | — | Compliant (per JLCPCB listing) |