ATK-LORA-01 vs ATK-LORA-02 Comparação
Comparação detalhada lado a lado de ATK-LORA-01 por ALIENTEK e ATK-LORA-02 por ALIENTEK. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | ATK-LORA-01 | ATK-LORA-02 |
|---|---|---|
| Marca | ALIENTEK | ALIENTEK |
| Categoria | RF Modules | RF Modules |
| Status do ciclo de vida | Ativo | Obsolete |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $5,50 | $5,40 |
| Module Type | LoRa wireless serial (UART) module | LoRa wireless serial port module |
| RF Chip | Semtech SX1278 | — |
| Operating Frequency | 410 MHz to 441 MHz | [DATA_NEEDED: sub-GHz ISM band] |
| Channel Step | 1 MHz (32 channels) | — |
| Modulation | LoRa (CSS) / FSK / OOK | LoRa CSS chirp spread spectrum |
| Air Data Rate (max) | 19200 bps | — |
| Communication Range | 3000 m (line-of-sight, open field) | — |
| Transmit Power | Up to +20 dBm (100 mW) | — |
| Receive Sensitivity | -137 dBm at SF6/SF7 BW=125 kHz [DATA_NEEDED: confirm exact SF/BW condition from datasheet] | — |
| Interface | UART (TTL) - TXD, RXD | — |
| Default UART Baud | 9600 bps | — |
| Tensão de alimentação | 3.3 V to 5 V DC | — |
| Module Size | 36 mm x 20 mm | — |
| Antenna Connector | SMA + optional IPEX pad | — |
| Temperatura de operação | -40 to +85 C [DATA_NEEDED: confirm from official datasheet] | -40C to +85C |
| Encryption | AES-128 hardware | — |
| Spreading Factor | SF6 to SF12 (configurable via AT commands) | — |
| Tipo de montagem | Through-hole pin header (DIP-style breakout) | Surface Mount (SMD) |
| Manufacturer | — | ALIENTEK (ZhengDianYuanZi) |
| RF Chipset | — | [DATA_NEEDED: chipset family] |
| Tx Power | — | up to +20 dBm (100 mW) |
| Rx Sensitivity | — | -120 dBm or better (low data rate) |
| Air Data Rate | — | 0.3 kbps to 62.5 kbps |
| Spreading Factors | — | 6 levels (SF6-SF12) |
| Bandwidth | — | 7.8 kHz to 500 kHz |
| Host Interface | — | UART (TXD/RXD), MD0, AUX, 3.3V TTL |
| Operating Voltage | — | 3.3 V DC typical |
| Package / Dimensions | — | SMD-15, 17 x 24 mm |
| Range (Line-of-Sight) | — | [DATA_NEEDED: spec range value] |
| Configuration | — | AT command set over UART |
| Max Packet Size | — | 256 bytes |
| Status RoHS | — | Compliant (per JLCPCB listing) |