ATMEGA329P-20ANR vs ATMEGA329P-20AU Comparaison

Comparaison détaillée côte à côte de ATMEGA329P-20ANR par Microchip Technology et ATMEGA329P-20AU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATMEGA329P-20ANR ATMEGA329P-20ANR - 8-bit AVR MCU 32KB Flash 20MHz 64-TQFP | Microchip

ATMEGA329P-20ANR - 8-bit AVR MCU 32KB Flash 20MHz 64-TQFP | Microchip

ATMEGA329P-20ANR ✓ Actif
Microchip Technology
ATMEGA329P-20AU ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU ✓ Actif

Comparaison des spécifications

Paramètre ATMEGA329P-20ANR ATMEGA329P-20AU
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $4,30 $4,71
Core Architecture AVR 8-bit RISC AVR (8-bit RISC, Harvard)
Program Memory Type Flash (In-System Programmable) —
Program Memory Size 32 KB (16K x 16) —
SRAM Size 2 KB —
EEPROM Size 1 KB —
Maximum CPU Speed 20 MHz —
MIPS Throughput 16 MIPS (up to 20 MHz) —
Supply Voltage Range 1.8 V to 5.5 V —
Plage de température de fonctionnement -40 C to +105 C —
Number of I/O Pins 54 —
Number of General-Purpose Registers 32 —
ADC 8-channel, 10-bit 10-bit, up to 8 single-ended channels
Timers/Counters Two 8-bit, One 16-bit —
Communication Interfaces USART, SPI (Master/Slave), TWI (I2C) —
Debug Interface JTAG JTAG (IEEE 1149.1 compliant)
Boîtier 64-TQFP (14x14 mm) 64-pin TQFP (14x14 mm, 0.8 mm pitch)
Type de montage Surface Mount Surface Mount
Lead-Free / RoHS Compliant —
Instruction Set — 131 instructions, mostly single-cycle
Program Memory (Flash) — 32 KB (16K x 16), In-System Programmable with RWW
EEPROM — 1 KB
SRAM — 2 KB (2K x 8)
Maximum Clock Speed — 20 MHz
Throughput — Up to 20 MIPS at 20 MHz
Supply Voltage (Vcc) — 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V)
General-Purpose I/O Pins — 54
General-Purpose Working Registers — 32
PWM Channels — 6
Communication Peripherals — 2x USART, 1x TWI (I2C), 1x SPI (also ISP)
Température de fonctionnement — -40C to +85C (industrial, -A suffix)
Statut RoHS — Compliant (Pb-free / Green)
Power-Save Modes — Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower)
QTouch Support — Yes (peripheral touch controller via library)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis