ATSAM4SD16CB-ANR vs ATSAM4SD16CB-CFN Comparaison
Comparaison détaillée côte à côte de ATSAM4SD16CB-ANR par Microchip Technology et ATSAM4SD16CB-CFN par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAM4SD16CB-ANR - 32-bit ARM Cortex-M4 MCU, 1MB Flash, 100-LQFP | Microchip
ATSAM4SD16CB-ANR ✓ ActifMicrochip Technology
ATSAM4SD16CB-CFN - 120MHz Cortex-M4 MCU 1MB Flash | Microchip
ATSAM4SD16CB-CFN ✓ ActifComparaison des spécifications
| Paramètre | ATSAM4SD16CB-ANR | ATSAM4SD16CB-CFN |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,30 | $8,85 |
| Core Architecture | ARM Cortex-M4F (32-bit RISC, with FPU) | ARM Cortex-M4 (ARMv7-M) with FPU and DSP extensions |
| Maximum CPU Clock | 120 MHz | — |
| Flash Memory | 1 MB (2 x 512 KB dual-bank) | — |
| SRAM | 160 KB | 160 KB (100 KB SRAM0 + 60 KB SRAM1) |
| Operating Voltage | 1.62 V to 3.6 V | — |
| Boîtier | 100-LQFP (14 x 14 mm) | 100-ball VFBGA (7x7 mm) |
| Température de fonctionnement | -40C to +105C (extended) | -40C to +85C (extended industrial) |
| USB Interface | USB 2.0 Full-Speed Device, embedded transceiver | — |
| External Bus Interface (EBI) | Yes - SRAM/NOR/PSRAM | — |
| ADC | 8-channel, 10-bit | 12-bit, up to 24 channels, 1 Msps |
| Timers | 2 x 3-channel 16-bit TC | 9x 16-bit TC channels, 3x 3-channel 32-bit TC, RTC, SysTick |
| Communication | 4 x USART, 2 x UART, 2 x SPI, 1 x HS-SPI, 2 x TWI (I2C), 2 x I2S | — |
| SD/MMC Interface | Yes (HSMCI) | — |
| Cryptography | TRNG + AES hardware accelerator | — |
| Silicon Revision | MRL B (Revision B) | — |
| Type de montage | Surface Mount | Surface Mount (BGA, reflow only) |
| Statut RoHS | Compliant | Compliant |
| Packaging | Tape & Reel | — |
| Maximum Clock Speed | — | 120 MHz |
| Program Memory (Flash) | — | 1 MB (1M x 8), dual-bank |
| Tension d'alimentation | — | 1.2 V core / 3.3 V I/O (1.62-3.6 V I/O range) |
| USB | — | USB 2.0 Full-Speed Device with on-chip PHY |
| Ethernet | — | 10/100 GMAC (requires external PHY) |
| Communication Peripherals | — | 5x USART/UART, 3x TWI (I2C), 2x SPI, 1x HS-SPI, 1x I2S, 1x CAN 2.0B |
| External Bus Interface | — | 16-bit EBI (SRAM, SDRAM, NAND Flash) |
| DMA | — | 24-channel peripheral DMA controller |
| Security | — | AES 256-bit, secure boot, Flash CRC, tamper detection |
| Niveau MSL | — | 3 (168 hours) |