ATSAMD21J16B-AU vs ATSAMD21J17A-MUT Comparaison
Comparaison détaillée côte à côte de ATSAMD21J16B-AU par Microchip Technology et ATSAMD21J17A-MUT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMD21J16B-AU - SAM D21 48MHz Cortex-M0+ MCU | Microchip
ATSAMD21J16B-AU ✓ ActifMicrochip Technology
ATSAMD21J17A-MUT - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip
ATSAMD21J17A-MUT ✓ ActifComparaison des spécifications
| Paramètre | ATSAMD21J16B-AU | ATSAMD21J17A-MUT |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,75 | $1,95 |
| Core | ARM Cortex-M0+ (M0+) | ARM Cortex-M0+ (32-bit) |
| CPU Architecture | 32-bit RISC | — |
| Fréquence d'horloge maximale | 48 MHz | — |
| Program Memory (Flash) | 64 KB (64K x 8) | — |
| Data Memory (SRAM) | 8 KB | — |
| Operating Voltage Range | 1.62 V to 3.63 V | — |
| Supply Voltage (nominal) | 3.3 V | — |
| Plage de température de fonctionnement | -40 C to +85 C | — |
| Boîtier | 64-pin TQFP (10x10 mm) | 64-QFN (9x9 mm) |
| I/O Pins | 52 programmable | 52 (typical for SAM D21J QFN64) |
| ADC | 12-bit, 8-channel, up to 350 ksps | 12-bit, up to 350 ksps |
| DAC | 10-bit, 1-channel | 12-bit, 1 MSPS |
| USB | USB 2.0 Full-Speed with OTG | Full-Speed USB 2.0 Device/Host with on-chip transceiver |
| SERCOM | 6 configurable (UART/SPI/I2C) | — |
| Timers | 16-bit TC, 8-bit TC, RTC | — |
| DMAC | 12-channel | — |
| Event System | 12-channel | — |
| External Interrupts (EIC) | 16 | — |
| Debug Interface | 2-pin Serial Wire Debug (SWD) | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (168 hours) | [DATA_NEEDED: MSL level] |
| Statut RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Functional Safety | FuSa capable | FuSa documentation (IEC 60730 class B ready) |
| Active Current (typ.) | 70 uA/MHz | — |
| Series | — | SAM D21J (Functional Safety / FuSa) |
| Maximum CPU Frequency | — | 48 MHz |
| CoreMark/MHz | — | 2.46 |
| Program Flash | — | 128 KB (128K x 8) |
| SRAM | — | 16 KB |
| RWW Flash Section | — | 4 KB |
| Supply Voltage (VDDIN) | — | 1.62 V to 3.63 V |
| SERCOM Modules | — | 6 (each configurable UART/SPI/I2C) |
| Analog Comparators | — | 2 |
| Timers (TC/TCC) | — | 8 (3 x TCC, 5 x TC) |
| RTC | — | Yes, with calendar mode |
| Température de fonctionnement | — | -40C to +85C (industrial) |