ATSAME54N19A-AU-EFP vs ATSAME51N20A-AU-EFP Comparaison
Comparaison détaillée côte à côte de ATSAME54N19A-AU-EFP par Microchip Technology et ATSAME51N20A-AU-EFP par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAME54N19A-AU-EFP - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME54N19A-AU-EFP ✓ ActifMicrochip Technology
ATSAME51N20A-AU-EFP - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME51N20A-AU-EFP ✓ ActifComparaison des spécifications
| Paramètre | ATSAME54N19A-AU-EFP | ATSAME51N20A-AU-EFP |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,28 | $8,10 |
| Core | ARM Cortex-M4F with FPU and DSP | ARM Cortex-M4F (with FPU) |
| Maximum Clock Speed | 120 MHz | — |
| Program Memory (Flash) | 512 KB dual-panel with ECC | 1 MB (1M x 8) |
| SRAM | 192 KB with ECC | 256 KB |
| Operating Voltage | 2.7 V to 3.6 V | — |
| Boîtier | TQFP-100 (14x14 mm) | 100-pin TQFP (14x14 mm) |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40C to +85C (industrial) | -40C to +85C |
| USB | USB 2.0 Full-Speed with integrated PHY | — |
| Ethernet | 10/100 Mbps MAC with IEEE 1588 | — |
| CAN | CAN-FD | — |
| ADC | 12-bit, 1 MSPS, up to 16 channels | 12-bit, up to 1 Msps |
| SERCOM Peripherals | Up to 8 (UART/SPI/I2C/LIN configurable) | — |
| DMA Channels | 5 | — |
| Nombre de broches | 100 | — |
| Statut RoHS | Compliant | Compliant |
| Niveau MSL | 3 (168 hours) | — |
| Core Architecture | — | ARM 32-bit |
| Maximum CPU Clock | — | 120 MHz |
| Flash Type | — | Dual-Panel Flash with ECC |
| Operating Voltage (VDDIO) | — | 3.3 V |
| USB Interface | — | Full-Speed USB 2.0 with embedded PHY |
| CAN Interface | — | 2x CAN-FD controllers |
| DAC | — | 12-bit |
| Communication Interfaces | — | SERCOM (UART/SPI/I2C), I2S, RS-485 |
| Timers/PWM | — | 16-bit TCC (Timer/Counter for Control) |
| Debug Interface | — | SWD (Serial Wire Debug) |
| Series | — | SAM E51 / SAM E53 family |
| Suffix Designation | — | EFP = Extended Flash Performance silicon revision |