ATSAME54N20A-AUT vs ATSAME54-XPRO Comparaison
Comparaison détaillée côte à côte de ATSAME54N20A-AUT par Microchip Technology et ATSAME54-XPRO par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAME54N20A-AUT - 120MHz ARM Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME54N20A-AUT ✓ ActifMicrochip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ ActifComparaison des spécifications
| Paramètre | ATSAME54N20A-AUT | ATSAME54-XPRO |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Development Boards |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,10 | $80,40 |
| Core Architecture | ARM Cortex-M4F (32-bit) | 32-bit RISC |
| Maximum CPU Clock | 120 MHz | — |
| FPU | Single-precision hardware Floating Point Unit | — |
| Program Flash | 1 MB (Dual-Panel, with ECC) | — |
| SRAM | 256 KB (with ECC) | 256 KB with ECC (on target MCU) |
| Operating Voltage (VDDIO) | 1.71 V to 3.6 V | — |
| Température de fonctionnement | -40 C to +85 C (automotive grade) | — |
| Boîtier | 100-pin TQFP (14x14 mm) | — |
| ADC | 12-bit, up to 1 Msps | — |
| DAC | 12-bit | — |
| CAN-FD Controllers | 2 | — |
| Ethernet MAC | 10/100 Mbps | — |
| USB | Full-Speed + High-Speed USB 2.0 with on-chip PHY | — |
| External Memory Bus | QSPI/SPI (for external Flash/PSRAM) | — |
| DMA | Yes (DMAC) | — |
| Type de montage | Surface Mount | — |
| Statut RoHS | Compliant | Compliant |
| Product Type | — | Evaluation Kit / Development Board |
| Target MCU | — | ATSAME54P20A |
| Core Processor | — | ARM Cortex-M4F (with FPU and DSP extensions) |
| Maximum Clock Speed | — | 120 MHz |
| Flash Memory | — | 1 MB dual-panel Flash with ECC (on target MCU) |
| Embedded Debugger | — | Atmel EDBG (onboard, no external probe required) |
| Debug Interfaces | — | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) |
| Main Crystal | — | 12 MHz |
| Backup Crystal | — | 32.768 kHz (RTC reference) |
| Backup Power | — | Supercapacitor for RTC retention |
| CAN Transceiver | — | ATA6561 (CAN-FD capable) |
| Extension Headers | — | 2x Xplained Pro extension headers, mikroBUS socket |
| Capture Interface | — | Parallel Capture Controller (ArduCAM compatible) header |
| USB Interfaces | — | USB-C debug (EDBG), USB-C micro-B device |
| Operating System Support | — | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 |