ATSAME70N20B-AN vs ATSAME70N20B-ANT Comparaison
Comparaison détaillée côte à côte de ATSAME70N20B-AN par Microchip Technology et ATSAME70N20B-ANT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAME70N20B-AN - 300MHz Cortex-M7 MCU 1MB Flash 100-LQFP | Microchip
ATSAME70N20B-AN ✓ ActifMicrochip Technology
ATSAME70N20B-ANT - ARM Cortex-M7 MCU 300MHz 1MB Flash LQFP-100 | Microchip
ATSAME70N20B-ANT ✓ ActifComparaison des spécifications
| Paramètre | ATSAME70N20B-AN | ATSAME70N20B-ANT |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $11,40 | $8,20 |
| Core Architecture | ARM Cortex-M7 with FPU | — |
| Maximum CPU Clock | 300 MHz | — |
| Flash Memory | 1024 KB (1 MB) | — |
| SRAM | 384 KB | 384 KB |
| Boîtier | LQFP-100 (14x14 mm) | 100-LQFP (14x14 mm) |
| Supply Voltage (VDDIO) | 1.62 V to 3.6 V | — |
| Supply Voltage (VDDCORE) | 1.2 V (internal LDO) | — |
| Température de fonctionnement | -40C to +85C (industrial) | -40C to +105C (industrial) |
| USB Interface | HS USB 2.0 Device/Host with on-chip PHY | — |
| CAN Interface | 2x CAN-FD controllers | — |
| Ethernet | 10/100 MAC with IEEE 1588 PTP | — |
| External Bus Interface | Yes, supports SDRAM up to 64 MB | — |
| Image Sensor Interface | Yes | — |
| Instruction Cache / Data Cache | 16 KB / 16 KB | — |
| DSP Extensions | Yes (single-cycle MAC, SIMD) | — |
| Statut RoHS | Compliant | Compliant |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (168 hours) | 3 (per LQFP standard) |
| Core | — | ARM Cortex-M7 with FPU |
| Core Revision | — | r1p1 (silicon revision B) |
| Maximum Clock Speed | — | 300 MHz |
| Program Memory | — | 1 MB Flash (1M x 8) |
| Supply Voltage Range | — | 1.7 V to 3.6 V |
| GPIO Count | — | 75 |
| Communication Interfaces | — | USB 2.0 High-Speed, 2x CAN-FD, Ethernet MAC, 3x SPI, 4x UART/USART, 2x I2C, HS SD card |
| ADC | — | 12-bit, up to 2 Msps |
| DMA Channels | — | 24 (XDMAC) |
| Supply Current (active) | — | [DATA_NEEDED: active current value] |
| AEC-Q100 | — | Not applicable (industrial-grade) |
| Lead-Free | — | Yes |