ATSAMG55J19A-MU vs ATSAMG55J19B-MUT Comparaison
Comparaison détaillée côte à côte de ATSAMG55J19A-MU par Microchip Technology et ATSAMG55J19B-MUT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMG55J19A-MU - Cortex-M4 MCU 120MHz 512KB Flash 64-QFN | Microchip
ATSAMG55J19A-MU ✓ ActifMicrochip Technology
ATSAMG55J19B-MUT - 120MHz Cortex-M4 MCU, 512KB Flash | Microchip
ATSAMG55J19B-MUT ✓ ActifComparaison des spécifications
| Paramètre | ATSAMG55J19A-MU | ATSAMG55J19B-MUT |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,42 | $5,74 |
| Core Processor | ARM Cortex-M4F (with FPU) | — |
| Core Size | 32-Bit | — |
| Maximum CPU Speed | 120 MHz | — |
| Program Memory Size | 512 KB Flash | — |
| RAM Size | Up to 176 KB SRAM | — |
| Tension d'alimentation | 3.0 V to 3.6 V | 1.62 V to 3.6 V (single supply) |
| Température de fonctionnement | -40C to +85C (Industrial) | -40 C to +85 C (Industrial, MUT suffix) |
| Boîtier | 64-pin QFN (7.5x7.5 mm) | 64-QFN MRLB, 7.5 x 7.5 mm with exposed pad |
| Type de montage | Surface Mount | Surface Mount |
| USB Interface | USB 2.0 Full-Speed with on-chip PHY | — |
| Audio Interface | I2S / TDM (up to 2 instances) | I2S / SSC (Synchronous Serial Controller) |
| ADC | [DATA_NEEDED: ADC resolution and channel count] | — |
| Active Current (picoPower) | 100 uA/MHz | — |
| Deep Sleep Current | <7 uA with SRAM retention | — |
| Wake-up Time | Down to 3 us from deep sleep | — |
| Statut RoHS | Compliant | Compliant |
| Niveau MSL | [DATA_NEEDED: MSL moisture sensitivity level] | MSL3 (per JEDEC J-STD-020) |
| Core Architecture | — | ARM Cortex-M4 with FPU (single-precision) and DSP extensions |
| Maximum CPU Frequency | — | 120 MHz |
| Program Memory (Flash) | — | 512 KB (512K x 8) |
| SRAM | — | 176 KB |
| ROM (Boot Loader) | — | 8 KB |
| GPIO Count | — | Up to 47 |
| USB | — | USB 2.0 Full-Speed Device with on-chip transceiver |
| Oscillators | — | 3 to 20 MHz crystal/ceramic resonator + 3 internal RC oscillators |
| Boot Loader | — | Embedded, supports Flash programming |
| Watchdog Timer | — | Yes |
| Power-on Reset / Brown-out Detector | — | Yes |