ATSAMG55J19B-MUT vs ATSAMG55J19A-MU Comparaison

Comparaison détaillée côte à côte de ATSAMG55J19B-MUT par Microchip Technology et ATSAMG55J19A-MU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATSAMG55J19B-MUT ATSAMG55J19B-MUT - 120MHz Cortex-M4 MCU, 512KB Flash | Microchip

ATSAMG55J19B-MUT - 120MHz Cortex-M4 MCU, 512KB Flash | Microchip

ATSAMG55J19B-MUT ✓ Actif
Microchip Technology
ATSAMG55J19A-MU ATSAMG55J19A-MU - Cortex-M4 MCU 120MHz 512KB Flash 64-QFN | Microchip

ATSAMG55J19A-MU - Cortex-M4 MCU 120MHz 512KB Flash 64-QFN | Microchip

ATSAMG55J19A-MU ✓ Actif

Comparaison des spécifications

Paramètre ATSAMG55J19B-MUT ATSAMG55J19A-MU
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $5,74 $5,42
Core Architecture ARM Cortex-M4 with FPU (single-precision) and DSP extensions —
Maximum CPU Frequency 120 MHz —
Program Memory (Flash) 512 KB (512K x 8) —
SRAM 176 KB —
ROM (Boot Loader) 8 KB —
Tension d'alimentation 1.62 V to 3.6 V (single supply) 3.0 V to 3.6 V
Température de fonctionnement -40 C to +85 C (Industrial, MUT suffix) -40C to +85C (Industrial)
Boîtier 64-QFN MRLB, 7.5 x 7.5 mm with exposed pad 64-pin QFN (7.5x7.5 mm)
GPIO Count Up to 47 —
USB USB 2.0 Full-Speed Device with on-chip transceiver —
Audio Interface I2S / SSC (Synchronous Serial Controller) I2S / TDM (up to 2 instances)
Oscillators 3 to 20 MHz crystal/ceramic resonator + 3 internal RC oscillators —
Boot Loader Embedded, supports Flash programming —
Watchdog Timer Yes —
Power-on Reset / Brown-out Detector Yes —
Type de montage Surface Mount Surface Mount
Niveau MSL MSL3 (per JEDEC J-STD-020) [DATA_NEEDED: MSL moisture sensitivity level]
Statut RoHS Compliant Compliant
Core Processor — ARM Cortex-M4F (with FPU)
Core Size — 32-Bit
Maximum CPU Speed — 120 MHz
Program Memory Size — 512 KB Flash
RAM Size — Up to 176 KB SRAM
USB Interface — USB 2.0 Full-Speed with on-chip PHY
ADC — [DATA_NEEDED: ADC resolution and channel count]
Active Current (picoPower) — 100 uA/MHz
Deep Sleep Current — <7 uA with SRAM retention
Wake-up Time — Down to 3 us from deep sleep

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis