BLE112-A-V1 vs BLE113-A-V1 Comparaison
Comparaison détaillée côte à côte de BLE112-A-V1 par Silicon Labs et BLE113-A-V1 par Silicon Labs. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Silicon Labs
BLE112-A-V1 - Bluetooth 4.0 BLE Module w/ Chip Antenna | Silicon Labs
BLE112-A-V1 ✗ Fin de vie
Comparaison des spécifications
| Paramètre | BLE112-A-V1 | BLE113-A-V1 |
|---|---|---|
| Marque | Silicon Labs | Silicon Labs |
| Catégorie | RF Modules | RF Modules |
| Statut du cycle de vie | Fin de vie | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $16,89 | $8,65 |
| Standard | Bluetooth v4.0 (Low Energy, single mode) | Bluetooth 4.0 (Bluetooth Smart / BLE) |
| Frequency | 2.4 GHz ISM band | — |
| Device Class | Class 2 (~10 m) | — |
| Antenna | Integrated chip antenna | — |
| Tension d'alimentation | 2.0 V to 3.6 V | — |
| Sleep Current (lowest power mode) | 400 nA | — |
| RX Sensitivity | -85 dBm | — |
| Serial Interfaces | SPI, UART | UART, SPI, ISP, PWM |
| Based on IC | TI CC2540 (integrated) | — |
| Interrupt Sources | 18 (6 groups) | — |
| Wake-up Time | A few hundred microseconds | — |
| Battery Support | 3V coin cell / 2x AAA | — |
| Type de montage | Surface Mount (castellated pads) | Surface Mount (castellated pads) |
| Firmware / Software | Bluegiga BLE stack v1.0 software | — |
| Température de fonctionnement | [DATA_NEEDED: Operating Temperature] | — |
| Package Dimensions | [DATA_NEEDED: Package Dimensions] | — |
| Statut RoHS | Compliant | — |
| Certification | [DATA_NEEDED: Regulatory Certification] | — |
| Frequency Band | — | 2.4 GHz ISM |
| Supply Voltage Range | — | 2.0 V to 3.6 V |
| Receive Sensitivity | — | -93 dBm |
| Air Data Rate | — | 2 Mbps (1 Mbps BLE) |
| Antenna Type | — | Integrated chip antenna |
| Utilized IC / Part | — | TI CC2541 |
| Flash Memory | — | 128 kB |
| On-Module Application Hosting | — | Yes (BGSCRIPT / BLE API, no external MCU required) |
| Active Mode Current | — | Approx. 6 mA (typical, per Silicon Labs community measurements) |
| Modulation | — | GFSK |
| Boîtier | — | 28-pad module, QFP28 footprint class |
| RF Family | — | Bluetooth |
| Maximum Transmit Power | — | [DATA_NEEDED: maximum transmit power] |
| Sleep Mode Current | — | [DATA_NEEDED: sleep mode current] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |