BLE112-A-V1 vs BLE113-A-V1 Comparação
Comparação detalhada lado a lado de BLE112-A-V1 por Silicon Labs e BLE113-A-V1 por Silicon Labs. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Silicon Labs
BLE112-A-V1 - Bluetooth 4.0 BLE Module w/ Chip Antenna | Silicon Labs
BLE112-A-V1 ✗ Fim de vida
Comparação de especificações
| Parâmetro | BLE112-A-V1 | BLE113-A-V1 |
|---|---|---|
| Marca | Silicon Labs | Silicon Labs |
| Categoria | RF Modules | RF Modules |
| Status do ciclo de vida | Fim de vida | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $16,89 | $8,65 |
| Standard | Bluetooth v4.0 (Low Energy, single mode) | Bluetooth 4.0 (Bluetooth Smart / BLE) |
| Frequency | 2.4 GHz ISM band | — |
| Device Class | Class 2 (~10 m) | — |
| Antenna | Integrated chip antenna | — |
| Tensão de alimentação | 2.0 V to 3.6 V | — |
| Sleep Current (lowest power mode) | 400 nA | — |
| RX Sensitivity | -85 dBm | — |
| Serial Interfaces | SPI, UART | UART, SPI, ISP, PWM |
| Based on IC | TI CC2540 (integrated) | — |
| Interrupt Sources | 18 (6 groups) | — |
| Wake-up Time | A few hundred microseconds | — |
| Battery Support | 3V coin cell / 2x AAA | — |
| Tipo de montagem | Surface Mount (castellated pads) | Surface Mount (castellated pads) |
| Firmware / Software | Bluegiga BLE stack v1.0 software | — |
| Temperatura de operação | [DATA_NEEDED: Operating Temperature] | — |
| Package Dimensions | [DATA_NEEDED: Package Dimensions] | — |
| Status RoHS | Compliant | — |
| Certification | [DATA_NEEDED: Regulatory Certification] | — |
| Frequency Band | — | 2.4 GHz ISM |
| Supply Voltage Range | — | 2.0 V to 3.6 V |
| Receive Sensitivity | — | -93 dBm |
| Air Data Rate | — | 2 Mbps (1 Mbps BLE) |
| Antenna Type | — | Integrated chip antenna |
| Utilized IC / Part | — | TI CC2541 |
| Flash Memory | — | 128 kB |
| On-Module Application Hosting | — | Yes (BGSCRIPT / BLE API, no external MCU required) |
| Active Mode Current | — | Approx. 6 mA (typical, per Silicon Labs community measurements) |
| Modulation | — | GFSK |
| Encapsulamento | — | 28-pad module, QFP28 footprint class |
| RF Family | — | Bluetooth |
| Maximum Transmit Power | — | [DATA_NEEDED: maximum transmit power] |
| Sleep Mode Current | — | [DATA_NEEDED: sleep mode current] |
| Faixa de temperatura de operação | — | [DATA_NEEDED: operating temperature range] |