BTG70501EPLXUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de BTG70501EPLXUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTG70501EPLXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,45 | $3,18 |
| Switch Type | High-Side Power Switch (PROFET +2 12V) | — |
| Number of Channels | 1 | 4 |
| Input / Output Ratio | 1:1 | — |
| Configuration de sortie | N-Channel High-Side | High-side, N-channel MOSFET |
| Current Limit (Typ.) | 3 A | — |
| Supply Voltage Vcc Range | 2.7 V to 28 V | — |
| Load-Dump Withstand | [DATA_NEEDED: load-dump transient rating] | — |
| On-State Resistance (Typ) | [DATA_NEEDED: Rdson value] | — |
| Operating Temperature (Tj) | -40 C to +150 C | — |
| Diagnostic Functions | Open-load, short-to-GND, short-to-Vbat, overtemperature | — |
| Current Limit Switch (CLS) Mode | Yes (for ADAS / power distribution) | — |
| Boîtier | PG-TSDSO-14 (14-pin TSSOP with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 (automotive) | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Statut RoHS | Compliant | — |
| Lead-Free | Yes | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fonction | — | Smart High-Side Power Switch |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| Plage de température de fonctionnement | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |