BTG70501EPLXUMA1 vs BTS70402EPGXUMA1 比較

詳細な並列比較: BTG70501EPLXUMA1 メーカー: Infineon および BTS70402EPGXUMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Infineon
BTG70501EPLXUMA1 BTG70501EPLXUMA1 - 3A Smart High-Side Switch | Infineon PROFET

BTG70501EPLXUMA1 - 3A Smart High-Side Switch | Infineon PROFET

BTG70501EPLXUMA1 ✓ 生産中
Infineon
BTS70402EPGXUMA1 BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 ✓ 生産中

仕様比較

パラメータ BTG70501EPLXUMA1 BTS70402EPGXUMA1
ブランド Infineon Infineon
カテゴリ Power MOSFET Drivers Power MOSFET Drivers
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $1.45 $3.18
Switch Type High-Side Power Switch (PROFET +2 12V) —
Number of Channels 1 4
Input / Output Ratio 1:1 —
出力構成 N-Channel High-Side High-side, N-channel MOSFET
Current Limit (Typ.) 3 A —
Supply Voltage Vcc Range 2.7 V to 28 V —
Load-Dump Withstand [DATA_NEEDED: load-dump transient rating] —
On-State Resistance (Typ) [DATA_NEEDED: Rdson value] —
Operating Temperature (Tj) -40 C to +150 C —
Diagnostic Functions Open-load, short-to-GND, short-to-Vbat, overtemperature —
Current Limit Switch (CLS) Mode Yes (for ADAS / power distribution) —
パッケージ PG-TSDSO-14 (14-pin TSSOP with exposed pad) PG-TSDSO-14 (exposed thermal pad)
実装タイプ Surface Mount Surface Mount
Qualification AEC-Q100 (automotive) —
MSLレベル [DATA_NEEDED: MSL rating] —
RoHS ステータス Compliant —
Lead-Free Yes —
Manufacturer — Infineon Technologies
Part Family — PROFET+2 (BTS70xxx series)
機能 — Smart High-Side Power Switch
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Operating Voltage Range — 6 V to 18 V nominal (load-dump tolerant to 40 V)
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Protection Features — Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
Diagnostic Interface — SPI status register, current-sense feedback
動作温度範囲 — -40 °C to +150 °C junction
AEC-Q100 Qualification — Qualified (automotive grade)
RoHS Compliance — Compliant

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼