BTH60702EPVXUMA1 vs BTS51202EKAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTH60702EPVXUMA1 par Infineon et BTS51202EKAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTH60702EPVXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,21 | $1,68 |
| Manufacturer | Infineon Technologies | — |
| Product Family | PROFET + 48V | — |
| Fonction | Smart high-side power switch (dual channel, 2 x 1:1) | — |
| On-State Resistance (typ.) | 60 mΩ per channel | — |
| Continuous Load Current (per channel) | 1.7 A | — |
| Number of Channels | 2 | 2 |
| Configuration | 2 x 1:1 (dual independent high-side) | — |
| Type de transistor | N-channel vertical power MOSFET with charge pump | — |
| Nominal Operating Voltage | 48 V board net | — |
| Maximum Supply Voltage | 54 V | — |
| Load Voltage Range | [DATA_NEEDED: load voltage range] | — |
| Current Sense / Diagnosis | Yes (analog current-sense output) | — |
| Protection Features | Over-load, short-circuit, over-voltage, reverse battery, thermal shutdown | — |
| Boîtier | PG-TSDSO-14 with exposed pad | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Operating Temperature (junction) | -40 °C to +150 °C (automotive grade) | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | [DATA_NEEDED: MSL level] | — |
| Statut RoHS | Compliant | Compliant |
| Topologie | — | Dual High-Side Switch (2 channels) |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Température de fonctionnement | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |