BTS3046SDRATMA1 vs BSP742RXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS3046SDRATMA1 par Infineon et BSP742RXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS3046SDRATMA1 | BSP742RXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,74 | $0,81 |
| Product Type | Smart Low-Side Power Switch (HITFET family) | Smart High-Side Power Switch |
| Manufacturer | Infineon Technologies | — |
| Switch Configuration | 1:1 N-Channel, single channel | — |
| Continuous Output Current | 3.6 A | — |
| On-State Resistance (Rds(on)) | 95 mOhm (0.095 ohm) typical | — |
| Operating Voltage Range (Vbb) | 4.5 V to 42 V | 5 V to 34 V |
| Load Type | Low-side switch (ground-referenced load) | — |
| Boîtier | PG-TO252-3-11 (DPAK, 3-pin with tab) | PG-DSO-8-6 (8-pin SOIC, exposed pad variant) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 C to +150 C | -40°C to +150°C (TJ) |
| Protection Features | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD | Overload, Short-Circuit, Thermal Shutdown with Restart, Overvoltage (Load Dump), Reverse Battery |
| Input Logic | CMOS-compatible with internal pull-down | — |
| Status Feedback | Yes (status output pin) | — |
| Automotive Qualification | AEC-Q100 (where variant specified) | — |
| RoHS / Lead-Free | Compliant / Yes | — |
| Topologie | — | 1:1 N-Channel High-Side Switch |
| Continuous Load Current | — | 400 mA |
| On-Resistance R_DS(on) (typ) | — | 70 mΩ |
| On-Resistance R_DS(on) (max) | — | [DATA_NEEDED: R_DS(on) max value at 25C] |
| Quiescent Current (Iq typ) | — | 5 µA |
| Input Type | — | CMOS-compatible logic, active-high |
| AEC-Q100 Qualification | — | Qualified (Automotive Grade) |
| Diagnostic Output | — | Yes (Status / Fault feedback) |
| Inductive Load Switching | — | Fast demagnetization integrated |
| RoHS Compliance | — | Compliant |
| MSL Moisture Sensitivity Level | — | MSL 2 (per JEDEC J-STD-020) |