BTS3046SDRATMA1 vs BSP742RXUMA1 Comparação
Comparação detalhada lado a lado de BTS3046SDRATMA1 por Infineon e BSP742RXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | BTS3046SDRATMA1 | BSP742RXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $0,74 | $0,81 |
| Product Type | Smart Low-Side Power Switch (HITFET family) | Smart High-Side Power Switch |
| Manufacturer | Infineon Technologies | — |
| Switch Configuration | 1:1 N-Channel, single channel | — |
| Continuous Output Current | 3.6 A | — |
| On-State Resistance (Rds(on)) | 95 mOhm (0.095 ohm) typical | — |
| Operating Voltage Range (Vbb) | 4.5 V to 42 V | 5 V to 34 V |
| Load Type | Low-side switch (ground-referenced load) | — |
| Encapsulamento | PG-TO252-3-11 (DPAK, 3-pin with tab) | PG-DSO-8-6 (8-pin SOIC, exposed pad variant) |
| Tipo de montagem | Surface Mount | Surface Mount |
| Faixa de temperatura de operação | -40 C to +150 C | -40°C to +150°C (TJ) |
| Protection Features | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD | Overload, Short-Circuit, Thermal Shutdown with Restart, Overvoltage (Load Dump), Reverse Battery |
| Input Logic | CMOS-compatible with internal pull-down | — |
| Status Feedback | Yes (status output pin) | — |
| Automotive Qualification | AEC-Q100 (where variant specified) | — |
| RoHS / Lead-Free | Compliant / Yes | — |
| Topologia | — | 1:1 N-Channel High-Side Switch |
| Continuous Load Current | — | 400 mA |
| On-Resistance R_DS(on) (typ) | — | 70 mΩ |
| On-Resistance R_DS(on) (max) | — | [DATA_NEEDED: R_DS(on) max value at 25C] |
| Quiescent Current (Iq typ) | — | 5 µA |
| Input Type | — | CMOS-compatible logic, active-high |
| AEC-Q100 Qualification | — | Qualified (Automotive Grade) |
| Diagnostic Output | — | Yes (Status / Fault feedback) |
| Inductive Load Switching | — | Fast demagnetization integrated |
| RoHS Compliance | — | Compliant |
| MSL Moisture Sensitivity Level | — | MSL 2 (per JEDEC J-STD-020) |