BTS428L2ATMA1 vs BTS3104SDRATMA1 Comparaison
Comparaison détaillée côte à côte de BTS428L2ATMA1 par Infineon et BTS3104SDRATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS428L2ATMA1 | BTS3104SDRATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,45 | $0,84 |
| Product Type | Smart High-Side Power Switch | Low-side power switch (HITFET family) |
| Technology | Smart SIPMOS (vertical N-channel MOSFET with charge pump) | — |
| Number of Channels | 1 | 1 |
| Input Type | CMOS-compatible, ground-referenced | — |
| On-State Resistance (R_DS(on)) | 50 mOhm (typical) | — |
| Continuous Load Current | 5.8 A | — |
| Tension d'alimentation de fonctionnement | [DATA_NEEDED: nominal and range] | — |
| Standby Current | Very low (per datasheet) | [DATA_NEEDED: standby current] |
| Overvoltage Protection | Load-dump / overvoltage clamp | — |
| Overtemperature Protection | Yes, with autorestart | — |
| Diagnostic Feedback | Yes (open-load, short-circuit, overtemperature) | — |
| Boîtier | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-3-11 (DPAK) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | [DATA_NEEDED: min/max] | -40 C to +150 C |
| RoHS / Pb-Free | Yes (Green product, Pb-free finish, J-STD-020) | — |
| Soldering | Pb-free reflow per IPC/JEDEC J-STD-020 | — |
| Qualification | Automotive-grade (PROFET family) | — |
| Configuration de sortie | — | Low-side, N-channel |
| Drain-to-Source Voltage (V_DS) Max | — | 60 V |
| Continuous Drain Current (I_D) | — | 2 A |
| On-State Resistance (R_DS(on)) Typ | — | [DATA_NEEDED: R_DS(on) value] |
| Input Logic Level | — | CMOS-compatible (active-high) |
| Supply Voltage (V_IN) | — | [DATA_NEEDED: V_IN range] |
| Protection Features | — | Overtemperature, overcurrent, short-circuit, overvoltage, ESD |
| Automotive Qualification | — | AEC-Q100 qualified |
| Statut RoHS | — | Compliant |
| Sans halogène | — | Yes |
| Niveau MSL | — | 1 |