BTS428L2ATMA1 vs BTS3104SDRATMA1 비교
다음의 상세 나란히 비교: BTS428L2ATMA1 제조: Infineon 및 BTS3104SDRATMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTS428L2ATMA1 | BTS3104SDRATMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.45 | $0.84 |
| Product Type | Smart High-Side Power Switch | Low-side power switch (HITFET family) |
| Technology | Smart SIPMOS (vertical N-channel MOSFET with charge pump) | — |
| Number of Channels | 1 | 1 |
| Input Type | CMOS-compatible, ground-referenced | — |
| On-State Resistance (R_DS(on)) | 50 mOhm (typical) | — |
| Continuous Load Current | 5.8 A | — |
| 동작 공급 전압 | [DATA_NEEDED: nominal and range] | — |
| Standby Current | Very low (per datasheet) | [DATA_NEEDED: standby current] |
| Overvoltage Protection | Load-dump / overvoltage clamp | — |
| Overtemperature Protection | Yes, with autorestart | — |
| Diagnostic Feedback | Yes (open-load, short-circuit, overtemperature) | — |
| 패키지 | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-3-11 (DPAK) |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 범위 | [DATA_NEEDED: min/max] | -40 C to +150 C |
| RoHS / Pb-Free | Yes (Green product, Pb-free finish, J-STD-020) | — |
| Soldering | Pb-free reflow per IPC/JEDEC J-STD-020 | — |
| Qualification | Automotive-grade (PROFET family) | — |
| 출력 구성 | — | Low-side, N-channel |
| Drain-to-Source Voltage (V_DS) Max | — | 60 V |
| Continuous Drain Current (I_D) | — | 2 A |
| On-State Resistance (R_DS(on)) Typ | — | [DATA_NEEDED: R_DS(on) value] |
| Input Logic Level | — | CMOS-compatible (active-high) |
| Supply Voltage (V_IN) | — | [DATA_NEEDED: V_IN range] |
| Protection Features | — | Overtemperature, overcurrent, short-circuit, overvoltage, ESD |
| Automotive Qualification | — | AEC-Q100 qualified |
| RoHS 상태 | — | Compliant |
| 할로겐 프리 | — | Yes |
| MSL 레벨 | — | 1 |