BTS441RGATMA1 vs BTS70082EPAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS441RGATMA1 par Infineon et BTS70082EPAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS441RGATMA1 | BTS70082EPAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,21 | $2,05 |
| Manufacturer | Infineon Technologies AG | — |
| Part Number | BTS441RGATMA1 | — |
| Switch Type | 1:1 N-Channel High-Side | High-side N-channel MOSFET switch |
| Nombre de sorties | 1 | — |
| Continuous Load Current | 17 A | — |
| Topologie | Smart High-Side Switch | — |
| Input Type | CMOS-compatible, ground referenced | — |
| Diagnostics | Yes (fault feedback) | — |
| Technology | Smart SIPMOS (N-channel vertical FET + charge pump) | — |
| Boîtier | PG-TO263-5-2 (TO-263-5) | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) |
| Type de montage | Surface Mount | Surface Mount |
| Nombre de broches | 5 | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb range, e.g. 6V-42V] | — |
| On-State Resistance (Rds(on)) | [DATA_NEEDED: Rds(on) at 25 C] | — |
| Over-Current Protection | Yes (integrated) | — |
| Thermal Protection | Yes (overtemperature shutdown) | — |
| Over-Voltage Protection | Yes (inductive load clamping) | — |
| Automotive Qualified | Yes (AEC-Q100 automotive grade) | — |
| Statut RoHS | Compliant | Compliant |
| Tape and Reel Quantity | 1000 (per reel) | — |
| Product Family | — | PROFET+2 (12 V, dual channel) |
| Number of Channels | — | 2 |
| On-Resistance (RDS(on)) per channel | — | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) |
| Continuous Load Current per channel | — | 7.5 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | 3.1 V to 28 V |
| Load Dump / Transient Tolerance | — | 42 V per ISO 7637-2 |
| Reverse Battery Protection | — | -16 V |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Current Sense (IS) Ratio kILIS | — | 5000 (typical) |
| Protection Features | — | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss |
| Diagnostic Output | — | Current-sense (IS) pin, analog/digital |
| Température de jonction en fonctionnement | — | -40 °C to +150 °C |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |
| Niveau MSL | — | MSL3 (per JEDEC J-STD-020) |