BTS441RGATMA1 vs BTS70082EPAXUMA1 비교

다음의 상세 나란히 비교: BTS441RGATMA1 제조: Infineon 및 BTS70082EPAXUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 BTS441RGATMA1 BTS70082EPAXUMA1
브랜드 Infineon Infineon
카테고리 Power MOSFET Drivers Power MOSFET Drivers
수명 주기 상태 활성 활성
재고 상태 In Stock In Stock
단가 (USD) $2.21 $2.05
Manufacturer Infineon Technologies AG —
Part Number BTS441RGATMA1 —
Switch Type 1:1 N-Channel High-Side High-side N-channel MOSFET switch
출력 수 1 —
Continuous Load Current 17 A —
토폴로지 Smart High-Side Switch —
Input Type CMOS-compatible, ground referenced —
Diagnostics Yes (fault feedback) —
Technology Smart SIPMOS (N-channel vertical FET + charge pump) —
패키지 PG-TO263-5-2 (TO-263-5) PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD)
실장 유형 Surface Mount Surface Mount
핀 수 5 —
Operating Voltage Range [DATA_NEEDED: Vbb range, e.g. 6V-42V] —
On-State Resistance (Rds(on)) [DATA_NEEDED: Rds(on) at 25 C] —
Over-Current Protection Yes (integrated) —
Thermal Protection Yes (overtemperature shutdown) —
Over-Voltage Protection Yes (inductive load clamping) —
Automotive Qualified Yes (AEC-Q100 automotive grade) —
RoHS 상태 Compliant Compliant
Tape and Reel Quantity 1000 (per reel) —
Product Family — PROFET+2 (12 V, dual channel)
Number of Channels — 2
On-Resistance (RDS(on)) per channel — 16 mΩ typical (8 mΩ channel-on resistance per channel pair)
Continuous Load Current per channel — 7.5 A
Nominal Supply Voltage — 12 V
Operating Supply Voltage Range — 3.1 V to 28 V
Load Dump / Transient Tolerance — 42 V per ISO 7637-2
Reverse Battery Protection — -16 V
Standby Current — [DATA_NEEDED: standby current uA]
Current Sense (IS) Ratio kILIS — 5000 (typical)
Protection Features — Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss
Diagnostic Output — Current-sense (IS) pin, analog/digital
동작 접합 온도 — -40 °C to +150 °C
AEC-Q100 Qualification — Yes (Automotive Grade)
MSL 레벨 — MSL3 (per JEDEC J-STD-020)

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청