BTS621L1E3128ABUMA1 vs ITS716GFUMA1 Comparaison
Comparaison détaillée côte à côte de BTS621L1E3128ABUMA1 par Infineon et ITS716GFUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS621L1E3128ABUMA1 - 24V Dual Hi-Side Switch, 8mΩ PROFET | Infineon
BTS621L1E3128ABUMA1 ✓ Actif
Comparaison des spécifications
| Paramètre | BTS621L1E3128ABUMA1 | ITS716GFUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,45 | $3,22 |
| Product Type | Dual-channel smart high-side power switch (PROFET) | Smart High-Side Power Switch |
| Number of Channels | 2 (dual high-side, 1:1) | 4 |
| FET Topology | N-Channel vertical power MOSFET with charge pump | — |
| On-State Resistance Rds(on) | 8 mΩ typical per channel | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Maximum Supply Voltage | 24 V (load-dump survivable) | — |
| Continuous Load Current | 4.4 A per channel | — |
| Plage de température de fonctionnement | -40 °C to +150 °C junction | -40 C to +85 C (industrial grade) |
| Boîtier | PG-TO263-7-2 (D2PAK-7, exposed tab) | PG-DSO-20-32 (20-pin SOIC, exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Input Logic Compatibility | CMOS-compatible, ground-referenced | — |
| Diagnostic Feedback | Yes - open-load and overtemperature reporting | — |
| Embedded Protection | Overload, current limit, short-circuit, thermal shutdown, overvoltage (load dump), fast demagnetization, reverse battery | — |
| Technology | Smart SIPMOS (monolithic) | — |
| RoHS / Lead-Free | Compliant (Pb-free) | — |
| Configuration de sortie | — | High-side (N-Channel MOSFET) |
| Continuous Current per Channel | — | 2.3 A |
| On-State Resistance (RON) per Channel | — | [DATA_NEEDED: Ron typical value] |
| Operating Voltage Range (Vbb) | — | 5 V to 36 V |
| Load Dump Tolerance | — | Up to 45 V |
| Standby Current | — | [DATA_NEEDED: Iq standby typical] |
| Input Logic Levels | — | CMOS/TTL compatible, parallel interface |
| Diagnostic Output | — | Open-drain fault flag, one per channel |
| Protection Features | — | Overload, short-circuit, over-temperature, over-voltage, ESD |
| PWM Capability | — | Up to 1 kHz |
| Résistance thermique, jonction-ambiance | — | [DATA_NEEDED: theta_JA value] |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |
| Statut RoHS | — | Compliant |