BTS70121EPAXUMA1 vs BTS70082EPAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70121EPAXUMA1 par Infineon et BTS70082EPAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS70121EPAXUMA1 | BTS70082EPAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,05 | $2,05 |
| Manufacturer | Infineon Technologies | — |
| Product Family | PROFET+2 (Protected FET) | PROFET+2 (12 V, dual channel) |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 2 |
| Configuration de sortie | High-Side | — |
| Switch Type | N-Channel (2x8 mOhm integrated) | High-side N-channel MOSFET switch |
| Courant de sortie maximal | 8.5 A | — |
| On-State Resistance (RDS(on)) | 2 x 8 mOhm (typical) | — |
| Boîtier | PG-TSDSO-14-22 (14-pin, exposed pad) | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) |
| Pin Pitch | 0.65 mm | — |
| Type de montage | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| Plage de température de fonctionnement | -40C to +150C (junction, AEC-Q100) | — |
| Supply Voltage (Vbb) | [DATA_NEEDED: Vbb operating range] | — |
| Load Dump Protection | Yes (integrated) | — |
| Reverse Battery Protection | Yes (compatible with harshest requirements per family datasheet) | -16 V |
| Diagnostics | Current sense / status output | — |
| Protections | Overload, short-circuit, over-temperature, over-voltage | — |
| Packaging | Tape & Reel | — |
| Niveau MSL | MSL2 or MSL3 (per JEDEC J-STD-020) | MSL3 (per JEDEC J-STD-020) |
| RoHS Compliance | Compliant | — |
| On-Resistance (RDS(on)) per channel | — | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) |
| Continuous Load Current per channel | — | 7.5 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | 3.1 V to 28 V |
| Load Dump / Transient Tolerance | — | 42 V per ISO 7637-2 |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Current Sense (IS) Ratio kILIS | — | 5000 (typical) |
| Protection Features | — | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss |
| Diagnostic Output | — | Current-sense (IS) pin, analog/digital |
| Température de jonction en fonctionnement | — | -40 °C to +150 °C |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |
| Statut RoHS | — | Compliant |