BTS70121EPAXUMA1 vs BTS70082EPAXUMA1 比較

詳細な並列比較: BTS70121EPAXUMA1 メーカー: Infineon および BTS70082EPAXUMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Infineon
BTS70121EPAXUMA1 BTS70121EPAXUMA1 - 8.5A Smart High-Side Power Switch | Infineon

BTS70121EPAXUMA1 - 8.5A Smart High-Side Power Switch | Infineon

BTS70121EPAXUMA1 ✓ 生産中

仕様比較

パラメータ BTS70121EPAXUMA1 BTS70082EPAXUMA1
ブランド Infineon Infineon
カテゴリ Power MOSFET Drivers Power MOSFET Drivers
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $1.05 $2.05
Manufacturer Infineon Technologies —
Product Family PROFET+2 (Protected FET) PROFET+2 (12 V, dual channel)
Product Type Smart High-Side Power Switch —
Number of Channels 1 2
出力構成 High-Side —
Switch Type N-Channel (2x8 mOhm integrated) High-side N-channel MOSFET switch
最大出力電流 8.5 A —
On-State Resistance (RDS(on)) 2 x 8 mOhm (typical) —
パッケージ PG-TSDSO-14-22 (14-pin, exposed pad) PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD)
Pin Pitch 0.65 mm —
実装タイプ Surface Mount Surface Mount
Automotive Qualification AEC-Q100 —
動作温度範囲 -40C to +150C (junction, AEC-Q100) —
Supply Voltage (Vbb) [DATA_NEEDED: Vbb operating range] —
Load Dump Protection Yes (integrated) —
Reverse Battery Protection Yes (compatible with harshest requirements per family datasheet) -16 V
Diagnostics Current sense / status output —
Protections Overload, short-circuit, over-temperature, over-voltage —
Packaging Tape & Reel —
MSLレベル MSL2 or MSL3 (per JEDEC J-STD-020) MSL3 (per JEDEC J-STD-020)
RoHS Compliance Compliant —
On-Resistance (RDS(on)) per channel — 16 mΩ typical (8 mΩ channel-on resistance per channel pair)
Continuous Load Current per channel — 7.5 A
Nominal Supply Voltage — 12 V
Operating Supply Voltage Range — 3.1 V to 28 V
Load Dump / Transient Tolerance — 42 V per ISO 7637-2
Standby Current — [DATA_NEEDED: standby current uA]
Current Sense (IS) Ratio kILIS — 5000 (typical)
Protection Features — Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss
Diagnostic Output — Current-sense (IS) pin, analog/digital
動作接合温度 — -40 °C to +150 °C
AEC-Q100 Qualification — Yes (Automotive Grade)
RoHS ステータス — Compliant

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼