BTS70402EPGXUMA1 vs BTG70501EPLXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70402EPGXUMA1 par Infineon et BTG70501EPLXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS70402EPGXUMA1 | BTG70501EPLXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,18 | $1,45 |
| Manufacturer | Infineon Technologies | — |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Fonction | Smart High-Side Power Switch | — |
| Number of Channels | 4 | 1 |
| Configuration de sortie | High-side, N-channel MOSFET | N-Channel High-Side |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | — |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | — |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Plage de température de fonctionnement | -40 °C to +150 °C junction | — |
| Boîtier | PG-TSDSO-14 (exposed thermal pad) | PG-TSDSO-14 (14-pin TSSOP with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Switch Type | — | High-Side Power Switch (PROFET +2 12V) |
| Input / Output Ratio | — | 1:1 |
| Current Limit (Typ.) | — | 3 A |
| Supply Voltage Vcc Range | — | 2.7 V to 28 V |
| Load-Dump Withstand | — | [DATA_NEEDED: load-dump transient rating] |
| On-State Resistance (Typ) | — | [DATA_NEEDED: Rdson value] |
| Operating Temperature (Tj) | — | -40 C to +150 C |
| Diagnostic Functions | — | Open-load, short-to-GND, short-to-Vbat, overtemperature |
| Current Limit Switch (CLS) Mode | — | Yes (for ADAS / power distribution) |
| Qualification | — | AEC-Q100 (automotive) |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |
| Statut RoHS | — | Compliant |
| Lead-Free | — | Yes |