BTS70402EPGXUMA1 vs BTG70501EPLXUMA1 Comparison
Detailed side-by-side comparison of BTS70402EPGXUMA1 by Infineon and BTG70501EPLXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTS70402EPGXUMA1 | BTG70501EPLXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Manufacturer | Infineon Technologies | — |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Function | Smart High-Side Power Switch | — |
| Number of Channels | 4 | 1 |
| Output Configuration | High-side, N-channel MOSFET | N-Channel High-Side |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | — |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | — |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Operating Temperature Range | -40 °C to +150 °C junction | — |
| Package | PG-TSDSO-14 (exposed thermal pad) | PG-TSDSO-14 (14-pin TSSOP with exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Switch Type | — | High-Side Power Switch (PROFET +2 12V) |
| Input / Output Ratio | — | 1:1 |
| Current Limit (Typ.) | — | 3 A |
| Supply Voltage Vcc Range | — | 2.7 V to 28 V |
| Load-Dump Withstand | — | [DATA_NEEDED: load-dump transient rating] |
| On-State Resistance (Typ) | — | [DATA_NEEDED: Rdson value] |
| Operating Temperature (Tj) | — | -40 C to +150 C |
| Diagnostic Functions | — | Open-load, short-to-GND, short-to-Vbat, overtemperature |
| Current Limit Switch (CLS) Mode | — | Yes (for ADAS / power distribution) |
| Qualification | — | AEC-Q100 (automotive) |
| MSL Level | — | [DATA_NEEDED: MSL rating] |
| RoHS Status | — | Compliant |
| Lead-Free | — | Yes |