BTS70402EPGXUMA1 vs BTS426L1E3062AAUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70402EPGXUMA1 par Infineon et BTS426L1E3062AAUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS70402EPGXUMA1 | BTS426L1E3062AAUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,18 | $2,35 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Fonction | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 4 | — |
| Configuration de sortie | High-side, N-channel MOSFET | High-Side |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | — |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | — |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Plage de température de fonctionnement | -40 °C to +150 °C junction | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] |
| Boîtier | PG-TSDSO-14 (exposed thermal pad) | PG-TO263-5-2 (DPAK-5, surface mount) |
| Type de montage | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Family | — | Classic PROFET 12V |
| Topologie | — | N-Channel Vertical Power FET with Charge Pump |
| Nombre de sorties | — | 1 |
| Typical On-State Resistance (RDS(on)) | — | 5 mΩ |
| Continuous Load Current | — | 7 A |
| Nominal Operating Voltage | — | 12 V (automotive) |
| Input Type | — | CMOS-compatible, ground-referenced |
| Diagnostic Output | — | Yes (ST pin, ground-referenced feedback) |
| Embedded Protections | — | Overload, Thermal Shutdown, Overvoltage Clamp, ESD |
| Technology | — | Smart SIPMOS, monolithic |
| Statut RoHS | — | Compliant |
| Automotive Qualification | — | AEC-Q100 (per Classic PROFET 12V family) |