BTS70402EPGXUMA1 vs BTS426L1E3062AAUMA1 Сравнение
Подробное сравнение бок о бок BTS70402EPGXUMA1 от Infineon и BTS426L1E3062AAUMA1 от Infineon. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Infineon
BTS426L1E3062AAUMA1 - 7A 12V Smart High-Side Switch | Infineon
BTS426L1E3062AAUMA1 ✓ АктивенСравнение характеристик
| Параметр | BTS70402EPGXUMA1 | BTS426L1E3062AAUMA1 |
|---|---|---|
| Бренд | Infineon | Infineon |
| Категория | Power MOSFET Drivers | Power MOSFET Drivers |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $3,18 | $2,35 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Функция | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 4 | — |
| Выходная конфигурация | High-side, N-channel MOSFET | High-Side |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | — |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | — |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Диапазон рабочих температур | -40 °C to +150 °C junction | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] |
| Корпус | PG-TSDSO-14 (exposed thermal pad) | PG-TO263-5-2 (DPAK-5, surface mount) |
| Тип монтажа | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Family | — | Classic PROFET 12V |
| Топология | — | N-Channel Vertical Power FET with Charge Pump |
| Количество выходов | — | 1 |
| Typical On-State Resistance (RDS(on)) | — | 5 mΩ |
| Continuous Load Current | — | 7 A |
| Nominal Operating Voltage | — | 12 V (automotive) |
| Input Type | — | CMOS-compatible, ground-referenced |
| Diagnostic Output | — | Yes (ST pin, ground-referenced feedback) |
| Embedded Protections | — | Overload, Thermal Shutdown, Overvoltage Clamp, ESD |
| Technology | — | Smart SIPMOS, monolithic |
| Статус RoHS | — | Compliant |
| Automotive Qualification | — | AEC-Q100 (per Classic PROFET 12V family) |