CP2102N-A01-GQFN28 vs CP2102N-A02-GQFN28R Comparaison
Comparaison détaillée côte à côte de CP2102N-A01-GQFN28 par Silicon Labs et CP2102N-A02-GQFN28R par Silicon Labs. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Silicon Labs
CP2102N-A01-GQFN28 - USB to UART Bridge QFN-28 | Silicon Labs (Tape & Reel)
CP2102N-A01-GQFN28 ✓ ActifSilicon Labs
CP2102N-A02-GQFN28R USB-to-UART Bridge, QFN28 | Silicon Labs (Tape & Reel)
CP2102N-A02-GQFN28R ✓ ActifComparaison des spécifications
| Paramètre | CP2102N-A01-GQFN28 | CP2102N-A02-GQFN28R |
|---|---|---|
| Marque | Silicon Labs | Silicon Labs |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,31 | $2,35 |
| Product Type | USB to UART Bridge Controller | — |
| Series | USBXpress | — |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Interface | USB 2.0 UART | — |
| Number of UART Channels | 1 | — |
| Débit de données | 300 baud to 1 Mbaud | — |
| Supply Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Supply Voltage (VDD) | 3.0 V to 3.6 V | 3 V to 3.6 V |
| Internal Regulator Output | 3.3 V (up to ~100 mA) | 3.3 V |
| Température de fonctionnement | -40 C to +85 C | -40C to +85C |
| Boîtier | 28-QFN (5x5 mm) with exposed pad | QFN-28 (5x5 mm) |
| Type de montage | Surface Mount | Surface Mount |
| GPIO | Yes (multiple, signal-configurable) | — |
| Reset Pin | RSTb (active-low hardware reset) | — |
| On-chip Oscillator | Yes (no external crystal required) | — |
| Niveau MSL | MSL3 (per JEDEC J-STD-020) | — |
| Statut RoHS | Compliant | Compliant |
| Host Driver | Silicon Labs CP210x VCP driver | — |
| Fonction | — | USB 2.0 to UART Bridge Controller |
| Protocol | — | USB 2.0 Full-Speed |
| I/O Voltage (VIO) | — | 1.8 V to VDD |
| Maximum Baud Rate | — | 3 Mbaud |
| USB Speed | — | Full-Speed (12 Mbps) |
| Digital I/O Pins | — | 7 |
| Internal Regulator Current | — | Up to 100 mA (external load) |
| Internal Oscillator | — | 48 MHz (no external crystal required) |
| ROM for Descriptors | — | 960 bytes (one-time programmable) |
| UART Data Bits | — | 5, 6, 7, or 8 (programmable) |
| Hardware Flow Control | — | RTS/CTS supported |