DG212DJ+ vs DG212CJ+ Comparaison
Comparaison détaillée côte à côte de DG212DJ+ par Analog Devices et DG212CJ+ par Intersil. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | DG212DJ+ | DG212CJ+ |
|---|---|---|
| Marque | Analog Devices | Intersil |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Circuits | 4 circuits | — |
| Switch Configuration | 1:1 SPST | 4 x SPST |
| Switch Type | Normally open SPST | — |
| On Resistance | 175 ohm | 175 ohm maximum |
| Positive Supply Voltage Range | +4.5 V to +18 V | — |
| Negative Supply Voltage Range | -4.5 V to -18 V | — |
| Supply Voltage Range | ±4.5 V to ±18 V | — |
| Control Logic | CMOS-compatible | — |
| Control Polarity | Inverted relative to DG202 | — |
| Latch-Up Protection | Guaranteed with input signals connected during power-supply disconnection | — |
| Boîtier | 16-pin PDIP | 16-pin PDIP |
| Type de montage | Through-hole | Through-hole |
| Lead-Free Status | Lead Free | — |
| Statut RoHS | RoHS Compliant | [DATA_NEEDED: RoHS status] |
| Production Status | PRODUCTION | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Channel-On Resistance Matching | [DATA_NEEDED: channel-on resistance matching] | — |
| Off Leakage Current | [DATA_NEEDED: off leakage current] | — |
| Charge Injection | [DATA_NEEDED: charge injection] | — |
| Switching Time | [DATA_NEEDED: switching time] | — |
| Power Consumption | [DATA_NEEDED: power consumption] | [DATA_NEEDED: power consumption] |
| Number of Channels | — | 4 channels |
| Initial Switch State | — | Normally open |
| Dual Supply Voltage Range | — | ±4.5 V to ±18 V |
| Turn-On Time | — | 1000 ns maximum |
| Turn-Off Time | — | 500 ns maximum |
| Control Input Type | — | Inverted digital control inputs |
| Signal-to-Noise Ratio | — | 120 dB typical |
| Off Isolation | — | -60 dB typical at 1 MHz |
| Channel-to-Channel Match | — | 5 ohm typical |
| Process Technology | — | CMOS monolithic |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |