DG212DJ+ vs DG212CJ+ So sánh

So sánh chi tiết song song của DG212DJ+ bằng Analog Devices và DG212CJ+ bằng Intersil. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
DG212DJ+ DG212DJ+ - Quad SPST CMOS Analog Switch | Analog Devices

DG212DJ+ - Quad SPST CMOS Analog Switch | Analog Devices

DG212DJ+ ✓ Hoạt động
Intersil
DG212CJ+ DG212CJ+ - Quad SPST CMOS Analog Switch | Intersil

DG212CJ+ - Quad SPST CMOS Analog Switch | Intersil

DG212CJ+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số DG212DJ+ DG212CJ+
Thương hiệu Analog Devices Intersil
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Number of Circuits 4 circuits —
Switch Configuration 1:1 SPST 4 x SPST
Switch Type Normally open SPST —
On Resistance 175 ohm 175 ohm maximum
Positive Supply Voltage Range +4.5 V to +18 V —
Negative Supply Voltage Range -4.5 V to -18 V —
Supply Voltage Range ±4.5 V to ±18 V —
Control Logic CMOS-compatible —
Control Polarity Inverted relative to DG202 —
Latch-Up Protection Guaranteed with input signals connected during power-supply disconnection —
Hộp 16-pin PDIP 16-pin PDIP
Kiểu lắp đặt Through-hole Through-hole
Lead-Free Status Lead Free —
Trạng thái RoHS RoHS Compliant [DATA_NEEDED: RoHS status]
Production Status PRODUCTION —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Channel-On Resistance Matching [DATA_NEEDED: channel-on resistance matching] —
Off Leakage Current [DATA_NEEDED: off leakage current] —
Charge Injection [DATA_NEEDED: charge injection] —
Switching Time [DATA_NEEDED: switching time] —
Power Consumption [DATA_NEEDED: power consumption] [DATA_NEEDED: power consumption]
Number of Channels — 4 channels
Initial Switch State — Normally open
Dual Supply Voltage Range — ±4.5 V to ±18 V
Turn-On Time — 1000 ns maximum
Turn-Off Time — 500 ns maximum
Control Input Type — Inverted digital control inputs
Signal-to-Noise Ratio — 120 dB typical
Off Isolation — -60 dB typical at 1 MHz
Channel-to-Channel Match — 5 ohm typical
Process Technology — CMOS monolithic
Điện áp cung cấp — [DATA_NEEDED: supply current]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá