DG441CY+T vs DG441CY+ Comparaison
Comparaison détaillée côte à côte de DG441CY+T par Analog Devices et DG441CY+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | DG441CY+T | DG441CY+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Channels | 4 channels | — |
| Switch Configuration | 4 x SPST, normally closed | 1:1 multiplexer/demultiplexer |
| On-Resistance | 85 ohm maximum | — |
| On-Resistance Matching | 4 ohm maximum between switches | 4 Ω maximum |
| On-Resistance Flatness | 9 ohm maximum over the signal range | 9 Ω maximum over the signal range |
| Turn-On Time | Less than 250 ns | — |
| Turn-Off Time | Less than 170 ns | — |
| Positive Single-Supply Range | +10 V to +30 V | — |
| Bipolar Supply Range | +/-4.5 V to +/-20 V | — |
| Process Technology | 44 V silicon-gate CMOS | — |
| Boîtier | 16-lead SOIC | 16-pin narrow SOIC |
| Type de montage | Surface mount | Surface mount |
| Control Logic Compatibility | TTL and CMOS compatible | — |
| Signal Conduction | Symmetric, in either direction | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Maximum Signal Voltage | [DATA_NEEDED: maximum signal voltage] | — |
| Maximum Switch Current | [DATA_NEEDED: maximum switch current] | — |
| Leakage Current | [DATA_NEEDED: leakage current] | — |
| Power Consumption | [DATA_NEEDED: power consumption] | 1.65 mW |
| Statut RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Product Type | — | Quad SPST analog switch IC |
| Number of Switches | — | 4 switches |
| Contact Type | — | SPST normally closed |
| Maximum On-Resistance | — | 85 Ω |
| Charge Injection | — | 10 pC maximum |
| ESD Tolerance | — | 2,000 V minimum |
| Bidirectional Conduction | — | Equal conduction in either direction |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| On-Resistance at Specified Supply Voltage | — | [DATA_NEEDED: on-resistance test voltage] |
| Off-State Leakage | — | [DATA_NEEDED: off-state leakage] |
| Switching Time | — | [DATA_NEEDED: switching time] |
| AEC-Q100 Qualification | — | not_applicable |