DG441CY+T vs DG441CY+ So sánh

So sánh chi tiết song song của DG441CY+T bằng Analog Devices và DG441CY+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
DG441CY+T DG441CY+T - 4-Channel SPST Analog Switch | Analog Devices

DG441CY+T - 4-Channel SPST Analog Switch | Analog Devices

DG441CY+T ✓ Hoạt động
Analog Devices
DG441CY+ DG441CY+ - Quad SPST 85Ω Analog Switch | Analog Devices

DG441CY+ - Quad SPST 85Ω Analog Switch | Analog Devices

DG441CY+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số DG441CY+T DG441CY+
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Number of Channels 4 channels —
Switch Configuration 4 x SPST, normally closed 1:1 multiplexer/demultiplexer
On-Resistance 85 ohm maximum —
On-Resistance Matching 4 ohm maximum between switches 4 Ω maximum
On-Resistance Flatness 9 ohm maximum over the signal range 9 Ω maximum over the signal range
Turn-On Time Less than 250 ns —
Turn-Off Time Less than 170 ns —
Positive Single-Supply Range +10 V to +30 V —
Bipolar Supply Range +/-4.5 V to +/-20 V —
Process Technology 44 V silicon-gate CMOS —
Hộp 16-lead SOIC 16-pin narrow SOIC
Kiểu lắp đặt Surface mount Surface mount
Control Logic Compatibility TTL and CMOS compatible —
Signal Conduction Symmetric, in either direction —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Maximum Signal Voltage [DATA_NEEDED: maximum signal voltage] —
Maximum Switch Current [DATA_NEEDED: maximum switch current] —
Leakage Current [DATA_NEEDED: leakage current] —
Power Consumption [DATA_NEEDED: power consumption] 1.65 mW
Trạng thái RoHS [DATA_NEEDED: RoHS status] unknown
REACH Status [DATA_NEEDED: REACH status] unknown
Product Type — Quad SPST analog switch IC
Number of Switches — 4 switches
Contact Type — SPST normally closed
Maximum On-Resistance — 85 Ω
Charge Injection — 10 pC maximum
ESD Tolerance — 2,000 V minimum
Bidirectional Conduction — Equal conduction in either direction
Supply Voltage Range — [DATA_NEEDED: supply voltage range]
On-Resistance at Specified Supply Voltage — [DATA_NEEDED: on-resistance test voltage]
Off-State Leakage — [DATA_NEEDED: off-state leakage]
Switching Time — [DATA_NEEDED: switching time]
AEC-Q100 Qualification — not_applicable

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá