DG442CJ+ vs DG442DJ+ Comparaison
Comparaison détaillée côte à côte de DG442CJ+ par Maxim Integrated et DG442DJ+ par Vishay Intertechnology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Vishay Intertechnology
DG442DJ+ - Quad SPST 85Ω Analog Switch | Vishay Intertechnology
DG442DJ+ UnknownComparaison des spécifications
| Paramètre | DG442CJ+ | DG442DJ+ |
|---|---|---|
| Marque | Maxim Integrated | Vishay Intertechnology |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Unknown |
| Number of Circuits | 4 circuits | — |
| Switch Configuration | 1:1 SPST | 4 independent SPST circuits |
| Contact State | Normally open | — |
| On-Resistance | 85 ohm | 85 ohm |
| On-Resistance Matching | 4 ohm maximum between switches | — |
| On-Resistance Flatness | 9 ohm maximum over the signal range | — |
| Signal Conduction | Bidirectional | — |
| Switching Behavior | Break-before-make | — |
| Off-Leakage Current | 500 pA | — |
| Switching Time | 170 ns and 250 ns | [DATA_NEEDED: switching time] |
| Technology | CMOS | Monolithic CMOS |
| Tension d'alimentation | 15 V maximum | [DATA_NEEDED: supply voltage range] |
| Nombre de broches | 16 pins | — |
| Boîtier | 16-PDIP | 16-pin PDIP |
| Package Width | 7.62 mm (0.300 inch) | — |
| Type de montage | Through hole | Through-hole |
| Temperature Grade | Commercial grade | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | 0 C to +70 C |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Channel-to-Channel Isolation | [DATA_NEEDED: channel-to-channel isolation] | — |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| Number of Channels | — | 4 circuits |
| Signal-to-Noise Ratio | — | 1:1 |
| Logic Compatibility | — | TTL and CMOS compatible |
| Control Inputs | — | 4 control inputs |
| Legacy Compatibility | — | Drop-in replacement for DG201A and DG202 series devices |
| Analog Signal Voltage Range | — | [DATA_NEEDED: analog signal voltage range] |
| Off Resistance | — | [DATA_NEEDED: off resistance] |
| Off Leakage Current | — | [DATA_NEEDED: off leakage current] |
| On-State Resistance Matching | — | [DATA_NEEDED: on-state resistance matching] |
| Charge Injection | — | [DATA_NEEDED: charge injection] |
| Power Consumption | — | [DATA_NEEDED: power consumption] |