DG442CJ+ vs DG442DJ+ Comparação
Comparação detalhada lado a lado de DG442CJ+ por Maxim Integrated e DG442DJ+ por Vishay Intertechnology. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Vishay Intertechnology
DG442DJ+ - Quad SPST 85Ω Analog Switch | Vishay Intertechnology
DG442DJ+ UnknownComparação de especificações
| Parâmetro | DG442CJ+ | DG442DJ+ |
|---|---|---|
| Marca | Maxim Integrated | Vishay Intertechnology |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Unknown |
| Number of Circuits | 4 circuits | — |
| Switch Configuration | 1:1 SPST | 4 independent SPST circuits |
| Contact State | Normally open | — |
| On-Resistance | 85 ohm | 85 ohm |
| On-Resistance Matching | 4 ohm maximum between switches | — |
| On-Resistance Flatness | 9 ohm maximum over the signal range | — |
| Signal Conduction | Bidirectional | — |
| Switching Behavior | Break-before-make | — |
| Off-Leakage Current | 500 pA | — |
| Switching Time | 170 ns and 250 ns | [DATA_NEEDED: switching time] |
| Technology | CMOS | Monolithic CMOS |
| Tensão de alimentação | 15 V maximum | [DATA_NEEDED: supply voltage range] |
| Número de pinos | 16 pins | — |
| Encapsulamento | 16-PDIP | 16-pin PDIP |
| Package Width | 7.62 mm (0.300 inch) | — |
| Tipo de montagem | Through hole | Through-hole |
| Temperature Grade | Commercial grade | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | 0 C to +70 C |
| Corrente de alimentação | [DATA_NEEDED: supply current] | — |
| Channel-to-Channel Isolation | [DATA_NEEDED: channel-to-channel isolation] | — |
| Status RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| Number of Channels | — | 4 circuits |
| Signal-to-Noise Ratio | — | 1:1 |
| Logic Compatibility | — | TTL and CMOS compatible |
| Control Inputs | — | 4 control inputs |
| Legacy Compatibility | — | Drop-in replacement for DG201A and DG202 series devices |
| Analog Signal Voltage Range | — | [DATA_NEEDED: analog signal voltage range] |
| Off Resistance | — | [DATA_NEEDED: off resistance] |
| Off Leakage Current | — | [DATA_NEEDED: off leakage current] |
| On-State Resistance Matching | — | [DATA_NEEDED: on-state resistance matching] |
| Charge Injection | — | [DATA_NEEDED: charge injection] |
| Power Consumption | — | [DATA_NEEDED: power consumption] |