DP83867ERGZR vs DP83867IRRGZT Comparaison

Comparaison détaillée côte à côte de DP83867ERGZR par Texas Instruments et DP83867IRRGZT par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
DP83867ERGZR DP83867ERGZR - 1GbE SGMII PHY | Texas Instruments

DP83867ERGZR - 1GbE SGMII PHY | Texas Instruments

DP83867ERGZR ✓ Actif
Texas Instruments
DP83867IRRGZT DP83867IRRGZT - Robust Gigabit Ethernet PHY | Texas Instruments

DP83867IRRGZT - Robust Gigabit Ethernet PHY | Texas Instruments

DP83867IRRGZT ✓ Actif

Comparaison des spécifications

Paramètre DP83867ERGZR DP83867IRRGZT
Marque Texas Instruments Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type 10/100/1000BASE-T Ethernet physical-layer transceiver Single-port gigabit Ethernet PHY transceiver
Ethernet Speeds 10 Mb/s, 100 Mb/s, and 1000 Mb/s —
Host Interfaces RGMII and SGMII —
Number of Ports 1 port 1 port
Supply Voltage Options 1.0 V, 1.8 V, and 2.5 V —
Extended Temperature Range -40 °C to 105 °C —
Boîtier 48-pin VQFN (RGZ) 48-pin VQFN (RGZ), 7 mm x 7 mm
Package Dimensions 7 mm x 7 mm —
Lead Pitch 0.5 mm —
Type de montage Surface mount Surface mount
Shipping Format Tape and reel —
Exposed Pad Yes —
Cable Diagnostics Supported Supported
IEEE 1588 Support SOF support —
Debug Interface JTAG 1149.1 —
Integrated PMD Sublayers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T Ethernet protocols —
Compliance RoHS and Green —
Moisture Sensitivity Level MSL 3, 260 °C, 168 hours —
Maximum Data Rate [DATA_NEEDED: maximum supported data rate specification] —
Power Consumption [DATA_NEEDED: typical and maximum power consumption] 457 mW
Ethernet Standards Supported — 10BASE-Te, 100BASE-TX, 1000BASE-T
Host Interface Options — RGMII, MII, GMII, SGMII
Plage de température de fonctionnement — -40 °C to 85 °C
Integrated MDI Termination — Yes, integrated MDI termination resistors
Programmable RGMII Delay Modes — 16 modes on RX and TX
Programmable Interface Termination — Programmable MII, GMII, and RGMII termination impedance
ESD Protection — Exceeds 8000 V IEC 61000-4-2
Emissions Compliance — Meets EN55011 Class B emission standards
IEEE 1588 SOF — Supported
JTAG Interface — IEEE 1149.1
Statut RoHS — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis