DP83867ERGZR vs DP83867IRRGZT तुलना

विस्तृत दोनों ओर की तुलना DP83867ERGZR द्वारा Texas Instruments और DP83867IRRGZT द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
DP83867ERGZR DP83867ERGZR - 1GbE SGMII PHY | Texas Instruments

DP83867ERGZR - 1GbE SGMII PHY | Texas Instruments

DP83867ERGZR ✓ सक्रिय
Texas Instruments
DP83867IRRGZT DP83867IRRGZT - Robust Gigabit Ethernet PHY | Texas Instruments

DP83867IRRGZT - Robust Gigabit Ethernet PHY | Texas Instruments

DP83867IRRGZT ✓ सक्रिय

विशेषता तुलना

पैरामीटर DP83867ERGZR DP83867IRRGZT
ब्रांड Texas Instruments Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type 10/100/1000BASE-T Ethernet physical-layer transceiver Single-port gigabit Ethernet PHY transceiver
Ethernet Speeds 10 Mb/s, 100 Mb/s, and 1000 Mb/s —
Host Interfaces RGMII and SGMII —
Number of Ports 1 port 1 port
Supply Voltage Options 1.0 V, 1.8 V, and 2.5 V —
Extended Temperature Range -40 °C to 105 °C —
पैकेज 48-pin VQFN (RGZ) 48-pin VQFN (RGZ), 7 mm x 7 mm
Package Dimensions 7 mm x 7 mm —
Lead Pitch 0.5 mm —
माउंटिंग प्रकार Surface mount Surface mount
Shipping Format Tape and reel —
Exposed Pad Yes —
Cable Diagnostics Supported Supported
IEEE 1588 Support SOF support —
Debug Interface JTAG 1149.1 —
Integrated PMD Sublayers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T Ethernet protocols —
Compliance RoHS and Green —
Moisture Sensitivity Level MSL 3, 260 °C, 168 hours —
Maximum Data Rate [DATA_NEEDED: maximum supported data rate specification] —
Power Consumption [DATA_NEEDED: typical and maximum power consumption] 457 mW
Ethernet Standards Supported — 10BASE-Te, 100BASE-TX, 1000BASE-T
Host Interface Options — RGMII, MII, GMII, SGMII
ऑपरेटिंग तापमान रेंज — -40 °C to 85 °C
Integrated MDI Termination — Yes, integrated MDI termination resistors
Programmable RGMII Delay Modes — 16 modes on RX and TX
Programmable Interface Termination — Programmable MII, GMII, and RGMII termination impedance
ESD Protection — Exceeds 8000 V IEC 61000-4-2
Emissions Compliance — Meets EN55011 Class B emission standards
IEEE 1588 SOF — Supported
JTAG Interface — IEEE 1149.1
RoHS स्थिति — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध