DRV8816PWP vs DRV8806PWPR Comparaison
Comparaison détaillée côte à côte de DRV8816PWP par Texas Instruments et DRV8806PWPR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
DRV8816PWP - 40V Dual Half-H Bridge Motor Driver | Texas Instruments
DRV8816PWP ✓ ActifComparaison des spécifications
| Paramètre | DRV8816PWP | DRV8806PWPR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,82 | $3,20 |
| Motor Driver Architecture | Dual 1/2-H Bridge (two independent half bridges) | — |
| Supply Voltage (VM) | 8 V to 38 V | 8.2 V to 38 V |
| Absolute Maximum VM | 40 V | — |
| Output Current per Channel | 2.8 A peak (per half bridge) | — |
| On-Resistance (HS + LS per output) | [DATA_NEEDED: RDSon per MOSFET] | — |
| Logic Input Voltage (VDD) | 3.3 V / 5 V compatible | — |
| Interface | Parallel (INx / ENx per half bridge) | SPI (serial, 3.3 V logic) |
| PWM Frequency | Up to 200 kHz | — |
| Current Sense | Integrated (external Rsense) | — |
| Protection Features | UVLO, thermal shutdown, shoot-through protection, fault flag | — |
| Température de fonctionnement | -40 C to +85 C | -40C to +85C |
| Boîtier | HTSSOP-16 (PWP) with PowerPAD | HTSSOP-16 (PWP) with PowerPAD |
| Thermal Resistance (theta_JA) | [DATA_NEEDED: theta_JA from datasheet] | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 2 | 2 |
| Statut RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Number of Channels | — | 4 (quad low-side) |
| Configuration de sortie | — | Low-side DMOS, open drain |
| Continuous Output Current per Channel | — | 2 A |
| Peak Output Current per Channel | — | 3 A |
| RDS(on) per Channel | — | 200 mOhm (typical) |
| Open-Load Detection | — | Yes, via SPI |
| Protection contre les surintensités | — | Yes, per channel |
| Arrêt thermique | — | Yes |
| Undervoltage Lockout | — | Yes |
| Built-in Clamp Diodes | — | Yes (freewheeling) |