E-L9637D013TR vs L9638D Comparaison
Comparaison détaillée côte à côte de E-L9637D013TR par STMicroelectronics et L9638D par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
E-L9637D013TR - ISO 9141 K-Line Bus Driver/Transceiver | STMicroelectronics
E-L9637D013TR ✓ ActifComparaison des spécifications
| Paramètre | E-L9637D013TR | L9638D |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Family | L9637 | — |
| Fonction | ISO 9141 K-Line Bus Driver / Transceiver | — |
| Number of Drivers/Receivers | 1/1 | — |
| Protocol | ISO 9141 (K-Line) | — |
| Operating Supply Voltage (VS) | 4.5 V to 36 V (40 V transient tolerant) | — |
| Reverse Battery Protection | Down to VS = -24 V | — |
| Supply Current (typ) | 2.3 mA | — |
| K Output Current Limit (typ) | 60 mA | — |
| Standby Current (ISSB) | mA @ VCC = 0.5 V (see datasheet) | — |
| Input Type | Logic (TXD) | — |
| Type de sortie | Logic (RXD) | — |
| Bus Output (K) | Open-drain with current-limit, reverse-battery protected | — |
| Plage de température de fonctionnement | -40 C to +150 C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 8-SOIC (0.154 inch / 3.90 mm width) | SO-8 (8SO), 4.9 mm x 3.9 mm body |
| Type de montage | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (TR) | — |
| Niveau MSL | 1 (per JEDEC J-STD-020) | — |
| Automotive Grade | AEC-Q100 qualified (per ST product page) | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS compliance statement] |
| Product Type | — | LIN bus transceiver (1/1, half duplex) |
| LIN Specification | — | LIN specification revision 2.0 |
| Maximum Transmission Rate | — | 20 kbaud |
| Operating Supply Voltage Range | — | 6 V to 26 V |
| Transient Supply Voltage | — | 40 V |
| Sleep Mode Quiescent Current | — | 10 uA typical |
| Wake-Up | — | Through LIN bus line |
| Enable Input | — | CMOS input from microcontroller |
| Bus Compatibility | — | ISO 9141 compatible |
| Bus Lines | — | 1 single-wire bidirectional LIN line |
| Number of Transceivers | — | 1 |
| ESD Protection | — | [DATA_NEEDED: ESD withstand voltage] |
| Supply Current (Operating) | — | [DATA_NEEDED: operating supply current] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free termination statement] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |