E-L9637D013TR vs L9638D So sánh

So sánh chi tiết song song của E-L9637D013TR bằng STMicroelectronics và L9638D bằng STMicroelectronics. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

STMicroelectronics
E-L9637D013TR E-L9637D013TR - ISO 9141 K-Line Bus Driver/Transceiver | STMicroelectronics

E-L9637D013TR - ISO 9141 K-Line Bus Driver/Transceiver | STMicroelectronics

E-L9637D013TR ✓ Hoạt động
STMicroelectronics
L9638D L9638D - LIN Bus Transceiver, 20 kbaud, 26 V | STMicroelectronics

L9638D - LIN Bus Transceiver, 20 kbaud, 26 V | STMicroelectronics

L9638D ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số E-L9637D013TR L9638D
Thương hiệu STMicroelectronics STMicroelectronics
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Family L9637 —
Chức năng ISO 9141 K-Line Bus Driver / Transceiver —
Number of Drivers/Receivers 1/1 —
Protocol ISO 9141 (K-Line) —
Operating Supply Voltage (VS) 4.5 V to 36 V (40 V transient tolerant) —
Reverse Battery Protection Down to VS = -24 V —
Supply Current (typ) 2.3 mA —
K Output Current Limit (typ) 60 mA —
Standby Current (ISSB) mA @ VCC = 0.5 V (see datasheet) —
Input Type Logic (TXD) —
Kiểu đầu ra Logic (RXD) —
Bus Output (K) Open-drain with current-limit, reverse-battery protected —
Khoảng nhiệt độ hoạt động -40 C to +150 C [DATA_NEEDED: operating temperature range]
Hộp 8-SOIC (0.154 inch / 3.90 mm width) SO-8 (8SO), 4.9 mm x 3.9 mm body
Kiểu lắp đặt Surface Mount Surface Mount
Packaging Tape & Reel (TR) —
Cấp MSL 1 (per JEDEC J-STD-020) —
Automotive Grade AEC-Q100 qualified (per ST product page) —
Trạng thái RoHS Compliant [DATA_NEEDED: RoHS compliance statement]
Product Type — LIN bus transceiver (1/1, half duplex)
LIN Specification — LIN specification revision 2.0
Maximum Transmission Rate — 20 kbaud
Operating Supply Voltage Range — 6 V to 26 V
Transient Supply Voltage — 40 V
Sleep Mode Quiescent Current — 10 uA typical
Wake-Up — Through LIN bus line
Enable Input — CMOS input from microcontroller
Bus Compatibility — ISO 9141 compatible
Bus Lines — 1 single-wire bidirectional LIN line
Number of Transceivers — 1
ESD Protection — [DATA_NEEDED: ESD withstand voltage]
Supply Current (Operating) — [DATA_NEEDED: operating supply current]
Lead-Free Status — [DATA_NEEDED: lead-free termination statement]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá