EPC1PC8 vs EPC1PC8-NW Comparaison
Comparaison détaillée côte à côte de EPC1PC8 par Altera et EPC1PC8-NW par Intel. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | EPC1PC8 | EPC1PC8-NW |
|---|---|---|
| Marque | Altera | Intel |
| Catégorie | Memory ICs | Memory ICs |
| Statut du cycle de vie | Obsolete | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,10 | $4,30 |
| Type de mémoire | OTP Configuration PROM (Non-volatile) | — |
| Taille de mémoire | 1 Mbit (1,048,576 bits) | 1 Mbit (1,046,496 bits) |
| Supply Voltage (VCC) | 5.0 V (typical) | 3.0 V to 5.5 V (3.3 V or 5 V nominal) |
| Configuration Interface | Altera proprietary serial (DATA, DCLK, OE, nCS) | — |
| Programmability | One-Time Programmable (OTP) | — |
| Boîtier | 8-pin PDIP (8-PDIP, 300 mil) | 8-pin PDIP (300-mil body, through-hole) |
| Type de montage | Through-Hole (THT) | — |
| Target FPGAs | ACEX 1K, APEX 20K/20KE/20KC, FLEX 10K/10KE/10KA, FLEX 6000/A | — |
| Pin Pitch | 2.54 mm (0.100 in) | — |
| Température de fonctionnement | 0 C to +70 C (commercial) [DATA_NEEDED: full min/max range] | 0C to +70C (commercial) |
| Programming Hardware | Altera MasterBlaster / ByteBlaster (legacy programmer) | — |
| Configuration Mode | Serial (1-bit data, 1-bit clock) | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant (Pb-free -NW suffix) |
| Lead-Free | [DATA_NEEDED: lead-free / SnPb plating] | — |
| Niveau MSL | [DATA_NEEDED: moisture sensitivity level] | MSL 2 (per JEDEC J-STD-020) |
| Product Type | — | OTP Configuration PROM (one-time programmable) |
| Interface | — | Altera / Intel serial configuration (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE) |
| Nombre de broches | — | 8 |
| Configuration Mode Support | — | Passive Serial (PS) for FLEX, APEX, Mercury, Cyclone families |
| Oscillator | — | Internal ring oscillator (EPC1/EPC1441 only; EPC2 uses external clock) |
| JTAG Boundary-Scan Support | — | No (EPC2 family only) |
| Programming Method | — | Altera ByteBlasterMV, BitBlaster, or compatible USB-Blaster via Quartus / MAX+PLUS II |
| Lead Finish | — | Pb-free matte tin (JEDEC J-STD-020 compliant) |
| Manufacturer | — | Intel (formerly Altera Corporation) |
| Compatible FPGA Families | — | FLEX 10K, APEX 20K, Mercury, Cyclone, MAX 7000S/AE/B |