EPC1PC8 vs EPC1PC8-NW Comparação
Comparação detalhada lado a lado de EPC1PC8 por Altera e EPC1PC8-NW por Intel. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | EPC1PC8 | EPC1PC8-NW |
|---|---|---|
| Marca | Altera | Intel |
| Categoria | Memory ICs | Memory ICs |
| Status do ciclo de vida | Obsolete | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $4,10 | $4,30 |
| Tipo de memória | OTP Configuration PROM (Non-volatile) | — |
| Tamanho da memória | 1 Mbit (1,048,576 bits) | 1 Mbit (1,046,496 bits) |
| Supply Voltage (VCC) | 5.0 V (typical) | 3.0 V to 5.5 V (3.3 V or 5 V nominal) |
| Configuration Interface | Altera proprietary serial (DATA, DCLK, OE, nCS) | — |
| Programmability | One-Time Programmable (OTP) | — |
| Encapsulamento | 8-pin PDIP (8-PDIP, 300 mil) | 8-pin PDIP (300-mil body, through-hole) |
| Tipo de montagem | Through-Hole (THT) | — |
| Target FPGAs | ACEX 1K, APEX 20K/20KE/20KC, FLEX 10K/10KE/10KA, FLEX 6000/A | — |
| Pin Pitch | 2.54 mm (0.100 in) | — |
| Temperatura de operação | 0 C to +70 C (commercial) [DATA_NEEDED: full min/max range] | 0C to +70C (commercial) |
| Programming Hardware | Altera MasterBlaster / ByteBlaster (legacy programmer) | — |
| Configuration Mode | Serial (1-bit data, 1-bit clock) | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant (Pb-free -NW suffix) |
| Lead-Free | [DATA_NEEDED: lead-free / SnPb plating] | — |
| Nível MSL | [DATA_NEEDED: moisture sensitivity level] | MSL 2 (per JEDEC J-STD-020) |
| Product Type | — | OTP Configuration PROM (one-time programmable) |
| Interface | — | Altera / Intel serial configuration (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE) |
| Contagem de pinos | — | 8 |
| Configuration Mode Support | — | Passive Serial (PS) for FLEX, APEX, Mercury, Cyclone families |
| Oscillator | — | Internal ring oscillator (EPC1/EPC1441 only; EPC2 uses external clock) |
| JTAG Boundary-Scan Support | — | No (EPC2 family only) |
| Programming Method | — | Altera ByteBlasterMV, BitBlaster, or compatible USB-Blaster via Quartus / MAX+PLUS II |
| Lead Finish | — | Pb-free matte tin (JEDEC J-STD-020 compliant) |
| Manufacturer | — | Intel (formerly Altera Corporation) |
| Compatible FPGA Families | — | FLEX 10K, APEX 20K, Mercury, Cyclone, MAX 7000S/AE/B |